[asterisk-users] VoicePulse Connect

[Wes Baehr]

I've experienced the "beginning silence" sensation with IAX (no firewalls).
As far as audio dropping out, that sounds like firewall or intertube issues.
Along with the other problems, I gave up on IAX and went pure SIP (except
for that pesky iaxmodem -- however, that works fine when receiving faxes
from a SIP trunk). 

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Stephen Bosch
Sent: Wednesday, August 08, 2007 6:43 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] VoicePulse Connect

Wes Baehr wrote:
> I had a lot of problems with garbled IAX calls (even when calling into
> just the IVR). The problem was compacted when I would bridge an incoming
> IAX call to an outgoing SIP call, though that may be a fault of
> Asterisk. Since using SIP everything has been working perfectly. I never
> had any real problems with dropping calls (that weren't on my end).
> However, I don't use IAX anymore, so I am not aware of any current issues.

This is interesting information -- I've had similar problems with IAX
trunks on totally different carriers.

Example: Callers do not hear the remote ringing, or only some of the
rings, or don't hear the beep tone for voice mail.

IAX is easier if you're behind a firewall :(

-Stephen-


_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users