[asterisk-users] low-level dump for PRI dchan debugging

[Andrew Joakimsen]

On 8/6/07, Erik Anderson <erikerik at gmail.com> wrote:
> On 8/6/07, Anthony Francis <anthonyf at rockynet.com> wrote:
> > Yeah you are sending the SABME's because you think you are the master,
> > they are not replaying with a UA because they think they are the master,
> > you should def be pri_cpe.
>
> Tried it...no go.

Usually, if that is the issue, you would get messages such as "We
think we're network, but so does the far end"


>
> > There is one other potential cause here, you may not have had the
> > sangoma install patch and rebuild zaptel. Not doing that can cause a D
> > channel lockout on your end, but the provider should be able to see the
> > the D is in lockout.
>
> I re-patched zaptel, compiled, and re-installed.  No difference.
>
> I think I'm just going to have to wait until tomorrow when I can get
> both Sangoma and the telco on the phone.
>
> -erik
>

In your wanpipe1.conf see if you have

TDMV_DCHAN      = 0