[asterisk-users] TE207P Question

[Jeremy Mann]

I need help on my zaptel.conf and Zapata.conf for a TE207P

I'd like Span 1 to receive a PRI from the phone company(US PRI).

I'd like Span 2 to interface with a Nortel Phone system as a PRI(acting as the phone company)

Essentially my asterisk box is a man in the middle intercepting calls from the PRI passing certain DID to the Nortel, also intercepting calls from the Nortel passing them via IAX to other asterisk boxes as necessary.

Do I just need to make both PRI signaling?  See below:

/etc/zaptel.conf
span=1,1,0,esf,b8zs
bchan=1-23
dchan=24
span=2,1,0,esf,b8zs
bchan=25-47
dchan=48

/etc/asterisk/Zapata.conf
Group=1
Signaling=pri_cpe
Switchtype=national
Context=from-pri
Channel=1-23
Group=2
Context=from-nortel
Channel=25-47


Thanks for any help.


________________________________
This e-mail, facsimile, or letter and any files or attachments transmitted with it contains information that is confidential and privileged. This information is intended only for the use of the individual(s) and entity(ies) to whom it is addressed. If you are the intended recipient, further disclosures are prohibited without proper authorization. If you are not the intended recipient, any disclosure, copying, printing, or use of this information is strictly prohibited and possibly a violation of federal or state law and regulations. If you have received this information in error, please notify Texas Health Management Group immediately at 1-817-310-4999. Texas Health Management Group, its subsidiaries, and affiliates hereby claim all applicable privileges related to this information.

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070807/3aba3fd1/attachment.htm