[asterisk-users] low-level dump for PRI dchan debugging

[Erik Anderson]

On 8/6/07, Darryl Dunkin <ddunkin at netos.net> wrote:
> wanpipemon is the way to do it as far as I know.
>
> For starters, what do your zaptel/zapata configs look like?

lpdlnx04*CLI> pri show span 1
Primary D-channel: 24
Status: Provisioned, Down, Active
Switchtype: Nortel DMS100
Type: Network

I know it's odd, but the telco instructed me to set my equipment as
the network end...hence pri_net:

/etc/zaptel.conf
loadzone=us
defaultzone=us

#Sangoma A102 port 1 [slot:10 bus:2 span: 1]
span=1,1,0,esf,b8zs
bchan=1-8
dchan=24


/etc/asterisk/zapata.conf
[trunkgroups]

[channels]
context=default
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
relaxdtmf=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1

immediate=no

;;Sangoma A102 port 1 [slot:10 bus:2 span: 1]
switchtype=dms100
context=from-pstn
group=1
signalling=pri_net
channel => 1-8

There you go.

As an aside, turns out that it's a national holiday in CA, so the
Sangoma support guys are on vacation for the day.

-erik