[asterisk-users] ZT_CHANCONFIG failedonchannel1:Nosuchdeviceoraddress

CSB cameron.beattie at appsteam.co.nz
Sat Apr 28 22:17:28 MST 2007


> On Sat, Apr 28, 2007 at 01:47:15PM +1200, CSB wrote:
>> >On Fri, Apr 27, 2007 at 07:11:48AM +1200, CSB wrote:
>> >
>> >[snip]
>> >
>> >>As suggested earlier I replaced this with:
>> >>/etc/modprobe.d/zaptel
>> >>options wctdm opermode=NEWZEALAND honormode=1 boostringer=1 
>> >>fastringer=1
>> >
>> >[snip]
>> >
>> >>dmesg
>> >>Zapata Telephony Interface Registered on major 196
>> >>Zaptel Version: 1.2.17.1
>> >>Zaptel Echo Canceller: KB1
>> >>wctdm: Unknown parameter `honormode'
>> >
>> >This is the problem
>> >
>> Updated
>> vi /etc/modprobe.d/zaptel
>> options wctdm opermode=NEWZEALAND fxshonormode=1 boostringer=1 
>> fastringer=1
>
> Again, please:
>
> rmmod wctdm; modprobe wctdm ; dmesg | tail
>
rmmod wctdm; modprobe wctdm ; dmesg | tail
ZT_CHANCONFIG failed on channel 1: No such device or address (6)
FATAL: Error running install command for wctdm
e100: eth1: e100_watchdog: link up, 10Mbps, half-duplex
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
eth1: no IPv6 routers present
Zapata Telephony Interface Registered on major 196
Zaptel Version: 1.2.17.1
Zaptel Echo Canceller: KB1
Zaptel Transcoder support loaded



More information about the asterisk-users mailing list