[asterisk-users] Big trouble with zap lines

[Bruce Reeves]

Do you have fxs modules or fxo modules? PSTN connects to fxo, but the
signaling is fxs like you have.


On 4/20/07, Ricardo Melendez <rmelendez at utep.com.mx> wrote:
>
> Hi, I recently install asterisk 1.4 over fedora 4, I configured 12 zap
> channels like this
>
> In zaptel.conf
> fxsks=1-4
> fxsks=5-8
> fxsks=9-12
> loadzone=us
> defaultzone=us
>
> in zapata.conf
> in channels section
> context=incoming
> signalling=fxs_ks
> channel => 1-4
> channel => 5-8
> channel => 9-12
>
> when i run ztcfg -vv show 12 channels correctly configured
> whe i run "zap show channels" in asterisk console this show 12 channels
> correctly configured
> when i call to a zap channel like this "Dial(zap/1/somenumber,15,r)" in
> the console appear that asterisk is dialing trought this channel to this
> somenumber but in the line the call
> never go out nor in, the same happens when dial from outside, the line is
> ringing until the normal timeout.
>
> the PSTN lines used work normally whit normal hardphones (PSTN)
>
> zaptel, asterisk, zttool and ztcfg all never send any error message.
>
> What  could be the problem??
>
> Could be a damaged wildcard
> My card is wctdm2400p with 12 fxs ports in 3 modules
>
> thanks in advance
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>


-- 
Bruce Reeves
Nortex Networks
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070420/3919df10/attachment.htm