[asterisk-users] Asterisk 1.2.16 - No Caller ID

[Eric "ManxPower" Wieling]

OCOSA ListAcc wrote:
> Eric,
> 
> I have watched the CLI before and it said nothing although I did change 
> the position of the callerid = asreceived to right below and nothing it 
> still shows up on the phones "asterisk" and in voice mail sent via 
> e-mail unknown caller:
> 
> Here is an output from a while back but it stopped so I do not know what 
> is up.....
> 
> -- Starting simple switch on 'Zap/1-1'
> Apr  6 16:54:39 ERROR[4726]: callerid.c:276 callerid_feed: fsk_serie 
> made mylen
> < 0 (-92)
> Apr  6 16:54:39 WARNING[4726]: chan_zap.c:6255 ss_thread: CallerID feed 
> failed:
> Success
> Apr  6 16:54:39 WARNING[4726]: chan_zap.c:6299 ss_thread: CallerID 
> returned with
> error on channel 'Zap/1-1'

These errors usually indicate that your rxgain for the FXO ports is 
either too high or too low.  Change the rxgain in 
/etc/asterisk/zapata.conf in increments of 2 either up or down until, 
but you generally don't want it to be less than -10 or greater than 10. 
  "reload chan_zap.so" should apply the gain changes.