[asterisk-users] sending an SMS via Asterisk?

[Per Jessen]

Per Jessen wrote:

> Per Jessen wrote:
> 
> OK, part of the confusion is now clearing up.  But I'm not getting
> much further.  When I try to send an SMS, I see the call going
> through, but no SMS is ever sent.

This is a bit of what I see in the debug output:  (this is sending a
longer message, protocol 2):

P[ 2]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 2]  --> None
    -- mISDN/3-u54 answered Local/0622100000 at default-d27f,2
       > Channel Local/0622100000 at default-d27f,1 was answered.
       > Launching SMS(0622100000|t) on Local/0622100000 at default-d27f,1
P[ 2] * IND: Got Fixup State:CONNECTED L3id:50012
  == Spawn extension (Internal, 0622100000, 2) exited non-zero
on 'Local/0622100000 at default-d27f,2'
P[ 2] I IND :FACILITY oad:0434439000 dad:0622100000 pid:19
state:CONNECTED
P[ 2]  --> channel:1 mode:TE cause:16 ocause:16 rad: cad:00622100000
P[ 2]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 2]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 2]  --> AOCD currency: currency:FR. amount:10 multiplier:1
typeOfChargingInfo:-1220842403
P[ 2] I IND :INFORMATION oad:0434439000 dad:0622100000 pid:19
state:CONNECTED
P[ 2]  --> channel:1 mode:TE cause:16 ocause:16 rad: cad:00622100000
P[ 2]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 2]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 2]  --> None
    -- SMS[-1] RX 93 00 6D
    -- SMS[0] TX 10 98 96 00 10 01 00 00 11 06 00 00 00 00 00 00 00 12
03 00 02 00 04 13 65 00 53 65 63 75 72 69 74 79 20 72 65 73 65 61 72 63
68 65 72 73 20 68 61 76 65 20 74 72 61 63 65 64 20 73 70 61 6D 2D 73 65
6E 64 69 6E 67 20 62 6F 74 6E 65 74 20 63 6C 69 65 6E 74 73 20 62 61 63
6B 20 74 6F 20 6E 65 74 77 6F 72 6B 73 20 72 75 6E 20 62 79 20 74 68 65
20 55 53 20 6D 69 6C 69 74 61 72 79 2E 17 01 00 01 18 0A 00 30 34 33 34
34 33 39 30 30 30 1B 01 00 01 1C 03 00 00 00 00 E8
P[ 2] I IND :DISCONNECT oad:0434439000 dad:0622100000 pid:19
state:CONNECTED
P[ 2]  --> channel:1 mode:TE cause:16 ocause:16 rad: cad:00622100000
P[ 2]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 2]  --> caps:Speech pi:8 keypad: sending_complete:0
P[ 2]  --> org:1 nt:0, inbandavail:1 state:10
P[ 2]  --> queue_hangup

In all the other examples I've come across on the 'net, there are multil
lines beginning "SMS[x] RX/TX .....".  


/Per Jessen, Zürich