[asterisk-users] zapata.conf

[ctotos at gmail.com]

On Tue, 10 Apr 2007 10:17:27 -0400 (EDT)
Alex Balashov <abalashov at evaristesys.com> wrote:

> 
> And, sorry if I misunderstood, but you still have "signaling,"
> not "signalling," in your zapata.conf?

 [chan_zap.so] => (Zapata Telephony w/PRI)
  == Parsing '/etc/asterisk/zapata.conf': Found
Apr 10 07:35:44 WARNING[4960]: chan_zap.c:1072 zt_open: Unable to specify channel 1: No such device or address
Apr 10 07:35:44 ERROR[4960]: chan_zap.c:7034 mkintf: Unable to open channel 1: No such device or address
here = 0, tmp->channel = 1, channel = 1
Apr 10 07:35:44 ERROR[4960]: chan_zap.c:10468 setup_zap: Unable to register channel '1'
Apr 10 07:35:44 WARNING[4960]: loader.c:414 __load_resource: chan_zap.so: load_module failed, returning -1
Apr 10 07:35:44 WARNING[4960]: loader.c:554 load_modules: Loading module chan_zap.so failed!

[root at fc-ast ~]# cat /etc/asterisk/zapata.conf
;
; Zapata telephony interface
;
; Configuration file
;
; You need to restart Asterisk to re-configure the Zap channel
; CLI> reload chan_zap.so 
;               will reload the configuration file,
;               but not all configuration options are 
;               re-configured during a reload.
[channels]
usecallerid=yes
hidecallerid=no
callwaiting=no
threewaycalling=yes
transfer=yes
echocancel=yes
echotraining=yes
immediate=no
;
;===============================================
; define the channels
signalling=fxo_ks
context=internal
channel => 1

signalling=fxs_ks
context=incoming
channel => 2

[root at fc-ast ~]# 


-- 
Thanks