[asterisk-users] zapata.conf

[ctotos at gmail.com]

On Tue, 10 Apr 2007 09:46:25 +0300
Tzafrir Cohen <tzafrir.cohen at xorcom.com> wrote:

> > Here is my zapata.conf
> > cat /etc/asterisk/zapata.conf
> > [channels]
> > usecallerid=yes
> > hidecallerid=no
> > callwaiting=no
> > threewaycalling=yes
> > transfer=yes
> > echocancel=yes
> > echotraining=yes
> > immediate=no
> > ;
> > ;===============================================
> > ; define the channels
> > signaling=fxo_ks
> 
> signalling=fxo_ks
> 
> (note the double 'l')
> 
> > context=internal
> > channel => 1
> > 
> > signaling=fxs_ks
> > context=incoming
> > channel => 2
> 

I still get:

 [chan_zap.so] => (Zapata Telephony w/PRI)
  == Parsing '/etc/asterisk/zapata.conf': Found
Apr 10 06:48:00 ERROR[4863]: chan_zap.c:10388 setup_zap: Signalling must be specified before any channels are.
Apr 10 06:48:00 WARNING[4863]: loader.c:414 __load_resource: chan_zap.so: load_module failed, returning -1
Apr 10 06:48:00 WARNING[4863]: loader.c:554 load_modules: Loading module chan_zap.so failed!

cat /etc/asterisk/zapata.conf

[channels]
usecallerid=yes
hidecallerid=no
callwaiting=no
threewaycalling=yes
transfer=yes
echocancel=yes
echotraining=yes
immediate=no
;
;===============================================
; define the channels
signaling=fxo_ks
context=internal
channel => 1

signaling=fxs_ks
context=incoming
channel => 2


-- 
Thanks