[asterisk-users] Asterisk installation issue - CLI showing 0 active channels

[Vijay Gaur]

Hi Stephen,
  I made the call from outside phone(cellphone) to my vonage number. Call
went to the voicemail. My extension.conf has
[incoming]
exten=>s,1,Answer() and more lines.

I assume core show channels should show 1 active channel. Its showing 0.

Thanks a lot again Stephen.
Regards,
Vijay




On 4/9/07, Stephen Bosch <posting at vodacomm.ca> wrote:
>
> Vijay Gaur wrote:
> >
> >
> > Hi All,
> >    I would appreciate a lot if you could help me. I have installed
> > Asterisk 1.4.1 and zaptel 1.4.2 on my redhat enterprise linux 4. I have
> > also installed 1 FXO port card: Digium TDM400P.
> > After loading zaptel driver I could see my digium card's led glow green.
> > Tested with zttool that its in OK state. I have configured fxsks=4 in
> > zaptel.conf(channel 4 cause FXO module is on port 4). I have also
> > configured channel 4 in incoming context in zapata.conf.
> >
> > After all configuration I started asterisk with vvvvvgc and made a call,
> > but I didn't see any call log on asterisk console.
>
> We need much more information.
>
> >From *where* did you make a call? Did you dial from another location
> into the Asterisk number (e.g., did you dial your Vonage number from
> outside?), or did you call out from your Asterisk server using an
> internal extension?
>
> Does the call succeed? Do you hear ringing, or a fast busy, or does the
> call go to voice mail?
>
> What is in your dialplan (extensions.conf)?
>
> > When I did core show channels its showing 0 active channels. Looks like
> > I did something wrong in my config.
> >
> > Also I dont see red-alarm in zttool if I take out pstn line.
>
> I don't think the TDM400P cards do media detection :) You're probably
> looking for the problem in the wrong place -- but answer the above
> questions first and we'll see what we can figure out.
>
> -Stephen-
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070409/5d536c3f/attachment.htm