[asterisk-users] Asterisknow or Trixbox?

[WipeOut]

I am sure its been discussed before but I couldn't find it in my searches..

Looking to replace my Asterisk box (Ver 1.0 still I think) and really 
like the idea of an easy to use gui to manage it.. I see the contenders 
appear to be Asterisknow and Trixbox..

Has anyone player with both who can give me the rundown of the basic 
pros and cons to either..

Which will best suit my setup??.. Currently I have 3 inbound numbers 
that come in over IAX plus one in/out analogue line to an X100P.. I have 
a DECT phone extension connecting to a TDM400P.. There are three local 
SIP extension and one in a remote office.. Inbound numbers are routed to 
a recorded message specific for that number and then set to ring on 
multiple phones (different combinations depending on the inbound number) 
and if not answered routed to a VM box.. Caller ID is changed on the 
inbound calls so that the phone displays will show which number was 
called rather than the calling number and so we can answer with the 
correct greeting.. The analogue inbound calls simply ring on all the 
phones.. All outbound calls are via the analogue line and use a carrier 
pre selection prefix for cheap outbound calls..

So which would you suggest I use?
Both are in beat versions at the moment.. Which is likely to so stable 
first?

Thanks