[asterisk-users] ZAP device reference in Zaptel 1.4

[Devraj Mukherjee]

Hi Everyone,

I am using Zaptel and Asterisk 1.4 and have a Digium card with two FXS
modules. The card works and ztcfg reports that it finds the two
modules.

Howevery when I try and place a call through the gateway I get the
following error message. I have tried to refer to the ZAP device as
ZAP/g2 etc

Any suggestions? Anything that's different about Zaptel 1.4?

    -- Executing [169223139 at default:1]
SetCDRUserField("SIP/103-b7802230", ""Telstra"") in new stack
    -- Executing [169223139 at default:2] Dial("SIP/103-b7802230",
"ZAP/4/69223139") in new stack
[Apr  4 10:47:43] WARNING[5659]: channel.c:3024 ast_request: No
channel type registered for 'ZAP'
[Apr  4 10:47:43] WARNING[5659]: app_dial.c:1090 dial_exec_full:
Unable to create channel of type 'ZAP' (cause 66 - Channel not
implemented)
  == Everyone is busy/congested at this time (1:0/0/1)
  == Auto fallthrough, channel 'SIP/103-b7802230' status is 'CHANUNAVAIL'


Zaptel Version: 1.4.1
Echo Canceller: MG2
Configuration
======================


Channel map:

Channel 03: FXS Kewlstart (Default) (Slaves: 03)
Channel 04: FXS Kewlstart (Default) (Slaves: 04)

2 channels configured.

-- 
"I never look back darling, it distracts from the now", Edna Mode (The
Incredibles)