[asterisk-users] tdm400 problem

[Jorge Boscan]

Hi all

I have a problem with an tdm400 with 2 modules 1 fxo 1 fxs it just
doesnt load the fxs module i dunno why...

zaptel.conf
loadzone=es
defaultzone=es
# qozap span definitions
# most of the values should be bogus because we are not really zaptel
span=1,1,3,ccs,ami
span=2,0,3,ccs,ami
span=3,0,3,ccs,ami
span=4,0,3,ccs,ami

bchan=1,2
dchan=3
bchan=4,5
dchan=6
bchan=7,8
dchan=9
bchan=10,11
dchan=12

fxsks=13
fxoks=14
------------
zapata.conf

[channels]
language=es
echocancel=yes
context=from-pstn
echocancel=yes
echocancelwhenbridged=yes
echotraining=500
rxgain=-4.0
txgain=-6.0
usecallerid=yes
hidecallerid=no
threewaycalling=yes

;; RDSI BRI
switchtype = euroisdn
signalling = bri_cpe
group=0
channel = 1-2,4-5,7-8
#channel = 1-2,7-8

;; FXO
signalling=fxs_ks
group=1
rxgain=1.0
txgain=-6.0
busydetect=yes
channel = 13

;; FXS
signalling=fxo_ks
group=2
context=from-internal
channel = 14
----------------------------------
dmesg
Freshmaker version: 73
Freshmaker passed register test
Module 0: Installed -- AUTO FXO (FCC mode)
!!!!!!! LOOP_CLOSE_TRES  iREG 1C = 1  should be 1000
!!!!!!! RING_TRIP_TRES  iREG 1D = 8000  should be 3600
!!!!!!! COMMON_MIN_TRES  iREG 1E = 0  should be 1000
!!!!!!! COMMON_MAX_TRES  iREG 1F = 0  should be 200
!!!!!!! PWR_ALARM_Q1Q2  iREG 20 = 1480  should be 7C0
!!!!!!! PWR_ALARM_Q3Q4  iREG 21 = 37C0  should be 2600
!!!!!!! PWR_ALARM_Q5Q6  iREG 22 = 3D70  should be 1B80
!!!!!!! LOOP_CLOSURE_FILTER  iREG 23 = 3970  should be 8000
!!!!!!! RING_TRIP_FILTER  iREG 24 = 78E0  should be 320
!!!!!!! TERM_LP_POLE_Q1Q2  iREG 25 = 8B60  should be 8C
!!!!!!! TERM_LP_POLE_Q3Q4  iREG 26 = 6A40  should be 100
!!!!!!! TERM_LP_POLE_Q5Q6  iREG 27 = 8070  should be 10
!!!!!!! CM_BIAS_RINGING  iREG 28 = FFFF  should be C00
!!!!!!! DCDC_MIN_V  iREG 29 = FFFF  should be C00
!!!!!!! DCDC_XTRA  iREG 2A = FFFF  should be 1000
!!!!!!! LOOP_CLOSE_TRES_LOW  iREG 2B = FFFF  should be 1000
 !!!!! Init Indirect Registers UNSUCCESSFULLY.
Indirect Registers failed verification.
Proslic Failed on Second Attempt to Calibrate Manually. (Try
-DNO_CALIBRATION in Makefile)
Module 1: FAILED FXS (FCC)
Module 2: Not installed
Module 3: Not installed
Found a Wildcard TDM: Wildcard TDM400P REV I (1 modules)
Registered tone zone 6 (Spain)



-- 
[Jorge J. Boscán Etura]
quando omni flunkus moritatus
Linux 2.6.17 X86_64 running fc6, lu #137000
+34636029900