[asterisk-users] chan-capi-HEAD and Asterisk 1.4.2

Peer Oliver Schmidt posde at theinternet.de
Tue Apr 3 00:00:30 MST 2007


Good Morning Armin,

>> tried the patch, but it did not work. It waits quite a long time
>> before the chan-capi error message comes up, according to the time
>> stamp it is about 12 seconds. It is kind of strange, that the whole
>> startup process for asterisk usually takes only about 4-5 seconds.

> That's too long, normaly the confirmation message arrives within a few 
> msecs. So it seems that the driver isn't responding.
> 
>> Do you need additional information?
> 
> Which card/driver do you use? 

root at server42:~# lspci -s 0:0e -v
00:0e.0 Network controller: AVM Audiovisuelles MKTG & Computer System
GmbH A1 ISDN [Fritz] (rev 02)
        Subsystem: AVM Audiovisuelles MKTG & Computer System GmbH
FRITZ!Card ISDN Controller
        Flags: medium devsel, IRQ 10
        Memory at ff001400 (32-bit, non-prefetchable) [size=32]
        I/O ports at dcc0 [size=32]

root at server42:~# capiinit status
1 fcpci      running  fcpci-dcc0-10    A1 3.11-07 0xdcc0 10

Driver from ubuntu edgy

> A debug log (capi trace) from the driver or kernelcapi helps to see
> what messages are wrong/missing.

What is the best way to produce this?
-- 
Best regards

Peer Oliver Schmidt
PGP Key ID: 0x83E1C2EA



More information about the asterisk-users mailing list