[asterisk-users] Problems with TE110P

[Klaverstyn, David C]

Lspci does show:
03:02.0 Ethernet controller: Digium, Inc.: Unknown device 0120 (rev 11)

dmesg | tail
ip_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
tg3: eth0: Link is up at 100 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.
lp: driver loaded but no devices found
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0344160(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
eth0: no IPv6 routers present


Using CentOS 4.4

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Tzafrir
Cohen
Sent: Monday, 2 April 2007 3:43 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Problems with TE110P

On Mon, Apr 02, 2007 at 02:56:30PM +1000, Klaverstyn, David C wrote:
> Type in cat /proc/zaptel/* displays
> 
> Span 1: ZTDUMMY/1 "ZTDUMMY/1 1"

The driver has not picked up your card.

> 
> 
> But if I type in 
> 	lsmod | grep -i wct
> 
> I get
> wcte11xp               26016  0
> wct4xxp               221120  0
> zaptel                184996  3 ztdummy,wcte11xp,wct4xxp

Two things to do:

1. What is the output of:   lspci

2. What really happens when the module loads?

  rmmod wcte11xp
  modprobe wcte11xp
  dmesg | tail

What linux distribution is it?

-- 
               Tzafrir Cohen       
icq#16849755                    jabber:tzafrir at jabber.org
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com       
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users