[asterisk-users] Sirrix to Legacy PBX

[Klaus Darilion]

Should work fine without problems. Sirrix has default NT wiring, thus 
you can use straight CAT5 cables.

regards
klaus

Marnus van Niekerk wrote:
> Hi,
> 
> I have a site where we currently have * and a legacy PBX (Samsung DCS) 
> both with BRI lines coming in.  The two in linked together with four 
> analogue channels which works most of the time.
> 
> The local Telco in South Africa will (eventually) install a PRI with 
> 100DID's next week and we want to then use the existing sirrix board to 
> feed 4BRI's to the legacy PBX effectively using it a a channel bank for 
> the existing phones on that system.
> 
> Something like this:
> 
> PRI --> * --> sirrix 4BRI --> DCS
> 
> The DCS will think it is connected to the telco and make calls as usual 
> (except for calls to internal extensions on * but that is a DCS 
> programming issue.)
> 
> 
> Anybody used a sirrix board like the before and any pointers before we 
> attempt this?
> 
> 
> Thank you
> 
> 
> Marnus van Niekerk
> 
> -- 
> 
> "Opportunity is missed by most people because it is
> dressed in overalls and looks like work."
> 
> Thomas Alva Edison - Inventor of 1093 patents,
> including the light bulb, phonogram and motion pictures.
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users