[asterisk-users] X100M location in circuit requirement?

[Nick Ellson]

I have just added a A1200P+FXO port to my home line for testing. In the 
interest of saving time, I wired it to the Phone port of my Fujitsu Speed 
Port DSL Modem.

So in total, I have the line from the telco going to my Fujitsu, which 
goes to the FXO port. In parallel at the POP I have a DSL line filter in 
series with the rest of my house phones (2 phones, one modem, and the ADT 
alarm system).

So I look at my console this morning as see all these events. Judging by 
the period, I am going to guess that my ADT alarm panel is calling home to 
check in on the parallel existsing phone system and Asterisk is seing 
that. Would that be correct? And.. When it comes to Asterisk, does it 
function fine as a second system to the same line as the house phones?

(Also, can anyone point me to the list of configuration options for an 
X100M FXO module for the asterisk conf files?)


Sep 27 21:50:16 NOTICE[17729]: chan_zap.c:6073 ss_thread: Got event 17 
(Polarity Reversal)...
Sep 27 21:50:23 WARNING[17729]: chan_zap.c:6149 ss_thread: CallerID 
returned with error on channel 'Zap/1-1'
     -- Executing Hangup("Zap/1-1", "") in new stack
   == Spawn extension (inbound_qwest, s, 1) exited non-zero on 'Zap/1-1'
     -- Hungup 'Zap/1-1'
     -- Starting simple switch on 'Zap/1-1'
Sep 28 00:20:23 NOTICE[18249]: chan_zap.c:6073 ss_thread: Got event 17 
(Polarity Reversal)...
Sep 28 00:20:30 WARNING[18249]: chan_zap.c:6149 ss_thread: CallerID 
returned with error on channel 'Zap/1-1'
     -- Executing Hangup("Zap/1-1", "") in new stack
   == Spawn extension (inbound_qwest, s, 1) exited non-zero on 'Zap/1-1'
     -- Hungup 'Zap/1-1'
     -- Starting simple switch on 'Zap/1-1'
Sep 28 01:50:23 NOTICE[18565]: chan_zap.c:6073 ss_thread: Got event 17 
(Polarity Reversal)...
Sep 28 01:50:31 WARNING[18565]: chan_zap.c:6149 ss_thread: CallerID 
returned with error on channel 'Zap/1-1'
     -- Executing Hangup("Zap/1-1", "") in new stack
   == Spawn extension (inbound_qwest, s, 1) exited non-zero on 'Zap/1-1'
     -- Hungup 'Zap/1-1'
     -- Starting simple switch on 'Zap/1-1'
Sep 28 02:50:23 NOTICE[18874]: chan_zap.c:6073 ss_thread: Got event 17 
(Polarity Reversal)...
Sep 28 02:50:31 WARNING[18874]: chan_zap.c:6149 ss_thread: CallerID 
returned with error on channel 'Zap/1-1'
     -- Executing Hangup("Zap/1-1", "") in new stack
   == Spawn extension (inbound_qwest, s, 1) exited non-zero on 'Zap/1-1'
     -- Hungup 'Zap/1-1'
     -- Starting simple switch on 'Zap/1-1'
Sep 28 04:20:25 NOTICE[20057]: chan_zap.c:6073 ss_thread: Got event 17 
(Polarity Reversal)...
Sep 28 04:20:32 WARNING[20057]: chan_zap.c:6149 ss_thread: CallerID 
returned with error on channel 'Zap/1-1'
     -- Executing Hangup("Zap/1-1", "") in new stack
   == Spawn extension (inbound_qwest, s, 1) exited non-zero on 'Zap/1-1'
     -- Hungup 'Zap/1-1'
     -- Starting simple switch on 'Zap/1-1'
Sep 28 05:20:24 NOTICE[20387]: chan_zap.c:6073 ss_thread: Got event 17 
(Polarity Reversal)...
Sep 28 05:20:31 WARNING[20387]: chan_zap.c:6149 ss_thread: CallerID 
returned with error on channel 'Zap/1-1'
     -- Executing Hangup("Zap/1-1", "") in new stack
   == Spawn extension (inbound_qwest, s, 1) exited non-zero on 'Zap/1-1'
     -- Hungup 'Zap/1-1'
     -- Starting simple switch on 'Zap/1-1'
Sep 28 05:50:25 NOTICE[20556]: chan_zap.c:6073 ss_thread: Got event 17 
(Polarity Reversal)...
Sep 28 05:50:33 WARNING[20556]: chan_zap.c:6149 ss_thread: CallerID 
returned with error on channel 'Zap/1-1'
     -- Executing Hangup("Zap/1-1", "") in new stack
   == Spawn extension (inbound_qwest, s, 1) exited non-zero on 'Zap/1-1'
     -- Hungup 'Zap/1-1'

-- 
Nick Ellson
CCDA, CCNP, CCSP, CCAI,
MCSE 2000, Security+, Network+
Network Hobbyist, VFR Private Pilot.