[asterisk-users] TE406P not working on Intel D101Ggc motherboard.

[Álvaro Palma]

I recently moved a TE406P card from an Intel D865GBF motherboard (where 
it worked fine), to an Intel D101Ggc card, and now I can't get the spans 
to got up correctly. All I get is an endless burst of:

== Primary D-Channel on span 4 up
== Primary D-Channel on span 2 up

!! Got a UA, but i'm in state 1

The other 2 spans doesn't even make an attempt to start.

If I set up one of the "semi-awake" spans in intense debug mode, all 
that I get is:

< Supervisory frame:
< SAPI: 00  C/R: 1 EA: 0
<  TEI: 000        EA: 1
< Zero: 0     S: 0 01: 1  [ RR (receive ready) ]
< N(R): 000 P/F: 1
< 0 bytes of data
-- ACKing all packets from 0 to (but not including) 0
-- Since there was nothing left, stopping T200 counter
-- Stopping T203 counter since we got an ACK
-- Nothing left, starting T203 counter
-- Unsolicited RR with P/F bit, responding
Sending Receiver Ready (0)
 > [ 02 01 01 01 ]
 > Supervisory frame:
 > SAPI: 00  C/R: 1 EA: 0
 >  TEI: 000        EA: 1
 > Zero: 0     S: 0 01: 1  [ RR (receive ready) ]
 > N(R): 000 P/F: 1
 > 0 bytes of data
-- Restarting T203 counter
-- Restarting T203 counter

and so on...

The spans are connected to Pika Primenet E1 card, which is set as 
Network side in the four spans. This card is installed in a different 
machine. My configuration for the Digium card is:

*********************************************************************
zaptel.conf:

span=1,1,0,ccs,hdb3,yellow
bchan=1-15
dchan=16
bchan=17-31
span=2,2,0,ccs,hdb3,yellow
bchan=32-46
dchan=47
bchan=48-62
span=3,3,0,ccs,hdb3,yellow
bchan=63-77
dchan=78
bchan=79-93
span=4,4,0,ccs,hdb3,yellow
bchan=94-108
dchan=109
bchan=110-124
loadzone=cl
defaultzone=cl
*********************************************************************
zapata.conf:

[channels]

language=es
switchtype=euroisdn
pridialplan=national
prilocaldialplan=national
priindication=inband

usecallerid=yes
hidecallerid=no
restrictcid=no
usecallingpres=yes
relaxdtmf=yes
echocancel=yes
echocancelwhenbridged=yes
echotraining=yes
rxgain=-3.0
txgain=-15.0

canpark=yes
resetinterval=never

signalling=pri_cpe
group=1
context=zap_pstn
channel => 1-15
channel => 17-46
channel => 48-77
channel => 79-108
channel => 110-124
*********************************************************************

Zaptel version 1.2.9.1, Asterisk 1.2.12.1, RHEL4 2.6.9-42.0.2.ELsmp,
/proc/interrupts says:

            CPU0       CPU1
   0:   47653469   47665247    IO-APIC-edge  timer
   1:          8          0    IO-APIC-edge  i8042
   8:          1          0    IO-APIC-edge  rtc
   9:          0          0   IO-APIC-level  acpi
  12:         67          0    IO-APIC-edge  i8042
  14:     446945     446248    IO-APIC-edge  ide0
169:          0          0   IO-APIC-level  libata
177:      30424      29392   IO-APIC-level  libata
185:          0          0   IO-APIC-level  ehci_hcd, ohci_hcd, ohci_hcd
193:        222          0   IO-APIC-level  HDA Intel
201:   47669502   47599256   IO-APIC-level  wct4xxp
209:     129534          0   IO-APIC-level  eth0
NMI:          0          0
LOC:   95329567   95329645
ERR:          0
MIS:          0

IRQ balance is running.

Thanks a lot for your answers.

-- 
Atly.
Alvaro Palma.