[asterisk-users] PRI Problems

Giorgio Incantalupo gincantalupo at fgasoftware.com
Thu Sep 21 09:02:45 MST 2006


Hi Klaus,
may sound stoopid but...we had a similar problem then we discover the 
cable we made had wrong pinout..and asterisk gave me no messages.
Hope may help.  ::)

Giorgio Incantalupo



Klaus Darilion wrote:
> Hi!
>
> Today I had problems with an E1 link to a Siemens PBX (Sangoma 2xE1 
> card). Although everything looked fine (wanrouter status "connected", 
> pri show status was also fine) there were no messages from the PBX to 
> Asterisk.
>
> The log file is below. I reloaded asterisk and the kernel module 
> several times - disconnect and reconnected the cables but nothing 
> worked. Finally I rebootet the server and than everything was fine again.
>
> Does someone knows the reason for this problem?
>
> thanks
> klaus
>
> 12:23:58    == Primary D-Channel on span 1 up
> 12:24:00    == Primary D-Channel on span 1 up
> 12:24:01    == Primary D-Channel on span 1 up
> 12:24:02    == Primary D-Channel on span 1 up
> 12:24:02      -- B-channel 0/5 successfully restarted on span 2
> 12:24:03    == Primary D-Channel on span 1 up
> 12:24:05  < [ 00 01 7f ]
> 12:24:05  < Unnumbered frame:
> 12:24:05  < SAPI: 00  C/R: 0 EA: 0
>           <  TEI: 000        EA: 1
> 12:24:05  <   M3: 3   P/F: 1 M2: 3 11: 3  [ SABME (set asynchronous 
> balanced mode extended) ]
>           < 0 bytes of data
> 12:24:05  -- Got SABME from cpe peer.
> 12:24:05  Sending Unnumbered Acknowledgement
> 12:24:05  > [ 00 01 73 ]
> 12:24:05  > Unnumbered frame:
> 12:24:05  > SAPI: 00  C/R: 0 EA: 0
>           >  TEI: 000        EA: 1
> 12:24:05  >   M3: 3   P/F: 1 M2: 0 11: 3  [ UA (unnumbered 
> acknowledgement) ]
>           > 0 bytes of data
> 12:24:05  -- Restarting T203 counter
> 12:24:05  -- Restarting T203 counter
> 12:24:05    == Primary D-Channel on span 1 up
> 12:24:06  < [ 00 01 7f ]
> 12:24:06  < Unnumbered frame:
> 12:24:06  < SAPI: 00  C/R: 0 EA: 0
>           <  TEI: 000        EA: 1
> 12:24:06  <   M3: 3   P/F: 1 M2: 3 11: 3  [ SABME (set asynchronous 
> balanced mode extended) ]
>           < 0 bytes of data
> 12:24:06  -- Got SABME from cpe peer.
> 12:24:06  Sending Unnumbered Acknowledgement
> 12:24:06  > [ 00 01 73 ]
> 12:24:06  > Unnumbered frame:
> 12:24:06  > SAPI: 00  C/R: 0 EA: 0
>           >  TEI: 000        EA: 1
> 12:24:06  >   M3: 3   P/F: 1 M2: 0 11: 3  [ UA (unnumbered 
> acknowledgement) ]
>           > 0 bytes of data
> 12:24:06  -- Restarting T203 counter
> 12:24:06  -- Restarting T203 counter
> 12:24:06    == Primary D-Channel on span 1 up
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>



More information about the asterisk-users mailing list