[asterisk-users] Cisco 7960 part numbers ...

[Cory Andrews]

I can't answer definitively in regard to the Smartnet, but I only see the US 
and ASIAPAC versions SKU'd up with US Cisco distributors (Ingram, Comstor, 
TechData) and I do not see an EU version on the GPL.

Cory J Andrews
++++++++++++
VOIPSupply.com
454 Sonwil Drive
Buffalo, NY 14225
++++++++++++++
voice - 800.398.VoIP X3402
email - Cory at VOIPSupply.com
AIM - B2CORY
----- Original Message ----- 
From: "Patrick" <asterisk-list at puzzled.xs4all.nl>
To: "Asterisk Users Mailing List - Non-Commercial Discussion" 
<asterisk-users at lists.digium.com>
Sent: Tuesday, September 19, 2006 10:32 PM
Subject: Re: [asterisk-users] Cisco 7960 part numbers ...


> On Tue, 2006-09-19 at 19:58 -0400, Cory Andrews wrote:
> [snip]
>> What you would need would be the following.
>>
>> (1) Cisco CP-7960G= (Global Spare)
>> (1) Cisco SW-SM-UL-7960= (SIP & MGCP License for Single 7960 IP Phone)
>> (1) CON-SNT-7960 (Smarnet 8X5 NBD IP Phone 7960 MGR Set)
>>
>> You will also need a Cisco authorized telephony partner to register
>> your smartnet contract for you, based on the serial number of the
>> phone you purchase.  When you receive the phone, and your contract is
>> registered, you can go to Cisco's website, apply for a CCO login, and
>> your login permissions will allow you to download the SIP firmware.
>> You can then migrate your phone firmware from SCCP to SIP, or your
>> reseller may do so for you.
>>
>> If you are not in the US, you will need the (ASIAPAC) version of the
>> Smartnet contract.
>
> Thanks for the info, good to know. One question: do Europeans also need
> to order the ASIAPAC version of the smartnet contract or is there also a
> European version?
>
> Regards,
> Patrick
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>