[asterisk-users] call across 2 asterisks

[Andrew Joakimsen]

So the config is stored in one db shared between two asterisk? What
you need to do is setup an IAX trunk between the two machines and then
tell it to dial UA2 on the local machine, and then the extension for
UA2 on the 2nd asterisk. Setup both the same on the other machine.

Now do you have the users always fixed to one machine? You would need
to figure a solution for CDR and voicemail of not... CDR and voicemail
you can do in a database as well..

On 9/15/06, unplug <maillisting at gmail.com> wrote:
> How can I make this work (UA1 makes call to UA2)?
> If I issue a command Dial(SIP/UA2), the call will fail.  Someone in
> the forum said that Asterisk doesn't support the configuration below.
> But I am thinking about the possibility to make it works.  Anyone can
> share if it really works?
>
> UA1                UA2
> ------NAT1        ------------NAT2
>   |                      |
>   |                      |
> Asterisk1       Asterisk2
>   \                     /
>    \                 /
>  --------- (ARA) DB----------------
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>