[asterisk-users] DID not getting passed?

[Bob Chiodini]

On Mon, 2006-09-11 at 20:25 -0700, Christopher Corn wrote:
> im having issues when routing calls from the outside with my new VSP.
> this is what asterisk tells me when i try to make an incoming call, i
> get the no service response when i  call.
> 
>     -- Executing GotoIf("SIP/christopher_corn-eddb", "1?from-trunk||
> 1") in new stack
>     -- Goto (from-trunk,s,1)
>     -- Executing NoOp("SIP/christopher_corn-eddb", "No DID or CID
> Match") in new stack
>     -- Executing Answer("SIP/christopher_corn-eddb", "") in new stack
>     -- Executing Wait("SIP/christopher_corn-eddb", "2") in new stack
>     -- Executing Playback("SIP/christopher_corn-eddb", "ss-noservice")
> in new stack
>     -- Playing 'ss-noservice' (language 'en')
> 
>  
> my extensions additional.conf has this
> [ext-did]
> include => ext-did-custom
> exten => 408335XXXX,1,Set(FROM_DID=4083354290)
> exten => 408335XXXX,n,Goto(ext-local,103,1)
> exten => s,1,Noop(No DID or CID Match)
> exten => s,n,Answer
> exten => s,n,Wait(2)
> exten => s,n,Playback(ss-noservice)
> exten => s,n,SayAlpha(${FROM_DID})
> exten => _[*#X].,1,Set(FROM_DID=${EXTEN})
> exten => _[*#X].,n,Noop(Received an unknown call with DID set to
> ${EXTEN})
> exten => _[*#X].,n,Goto(ext-did,s,1)
> ; end of [ext-did]
>  
>  
> i tried to replacing my number with my username, my phone number
> without area code, using dashes, but nothing works. 
>  
> is it because my vsp, axvoice.com doesn't pass did's?
>  
> any information is appreciated. thanks.
> 

Try turning on SIP debug to see what you are getting from your provider.

Bob...