[asterisk-users] Problems configuring Polycom 301

[Jim Freeze]

Hi

I have successfully been running with several Polycom SoundPoint 501
phones and recently purchased some Polycom 301 phones.
However, I can't seem to get the phones to register. The phone sees
the asterisk server, but all calls our are busy.

The only difference for 'sip show peer xxx' for a working 501 phone and
a non working 301 phone is:
asterisk1*CLI>

  Addr->IP     : 192.168.80.204 Port 5060       # 501

  Addr->IP     : (Unspecified) Port 0           # 301

'sip show peers' returns:

asterisk1*CLI> sip show peers
Name/username              Host            Dyn Nat ACL Port     Status
720/720                    (Unspecified)    D          0        UNKNOWN
712/712                    192.168.8.205   D          5060     OK (80 ms)
711/711                    192.168.8.203   D          5060     OK (84 ms)
710/710                    192.168.8.204   D          5060     OK (98 ms)

Any 301 configuration tips would be appreciated.

Thanks

-- 
Jim Freeze
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060909/acd3fc27/attachment.htm