[asterisk-users] Re: No such device -> TDM13B
Iván Vega R.
contacto at ivanvega.name
Fri Sep 8 17:35:51 MST 2006
Oh my god, it works! This is a nice friday! Thanks for the tip. In the
end, what I did was I retraced my steps, and I realized I hadn't
connected the card to a power cable, and I had the signalling on
zapata.conf backwards... Also I disabled most of the devices on the
motherboard, including USB (good thing you can control Linux from
another machine quite easily!) so the card wouldn't share its IRQ.
Now Batman can make calls!
On 9/8/06, Eric ManxPower Wieling <eric at fnords.org> wrote:
> wcfxo is used only for the X100P (and some clones). It is not used for
> any other card. wctdm supports both FXO and FXS. Maybe you are just
> confused about which module is associated with which channel.
> Iván Vega R. wrote:
> > Upon further investigation, I tried the following:
> > lsmod | grep 'wc*'
> > I can see wctdm (I believe this is the fxs module, no?), wcfxo,
> > zaptel... so I think so far so good. Then:
> > cat /proc/interrupts
> > There I only see the wctdm:
> > 50: 9556184 0 IO-APIC-level uhci_hcd:usb3, wctdm
> > I reckon I should move the card to another slot or somehow disable the
> > USB port?
> > Also, wcfxo does not show up on the list, and I can see on the card
> > that the FXO port (I'm guessing it's that port) is not lit, while the
> > other 3 are. So I'm guessing it didn't get installed or something?
> > The plot thickens... Does anyone have any idea what the problem could be?
> > Thanks!
> > On 9/8/06, Iván Vega R. <contacto at ivanvega.name> wrote:
> >> Hi again!
> >> So while ztcfg ran without errors, now asterisk won't run. Here's the
> >> relevant part of the error:
> >> WARNING: chan_zap.c:921 zt_open: Unable to specify channel 1:
> >> No such device
> >> ERROR: chan_zap.c:6879 mkintf: Unable to open channel 1: No
> >> such device here = 0, tmp->channel = 1, channel = 1
> >> Now I'm totally lost, so any help is really appreciated.
> >> Thanks!
> >> Ivan V.
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> --Bandwidth and Colocation provided by Easynews.com --
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
More information about the asterisk-users