[asterisk-users] Re: Little help for a newbie configuring a TDM13B - ztcfg fails on channel 4

[Iván Vega R.]

Amazing how one can find an answer seconds before asking for help... I
was confused with zaptel.conf... I changed the order of the channels
there and it works now, hehe.

> On 9/8/06, Iván Vega R. <contacto at ivanvega.name> wrote:
> > Hi everyone,
> >
> > I'm new on Asterisk. I'm trying to follow a few tutorials on the net,
> > and fortunately this has been the only stumbling block so far.
> >
> > I do:
> > modprobe zaptel
> > modprobe wcfxs
> > modprobe wcfxs
> > modprobe wcfxs
> > modprobe wcfxo
> >
> > I have this on zapata.conf:
> > [channels]
> > busydetect=1
> > busycount=7
> >
> > relaxdtmf=yes
> > transfer=yes
> > cancallforward=yes
> >
> > usecallerid=yes
> >
> > echocancel=yes
> > echocancelwhenbridged=yes
> >
> > rxgain=0.0
> > txgain=0.0
> >
> > group=1
> > pickupgroup=1-4
> >
> > immediate=no
> >
> > context=hemac
> >
> > signalling=fxo_s
> > callerid=asreceived
> > channel=1
> > channel=2
> > channel=3
> >
> > group=2
> > callerid="Batman"<123>
> > signalling=fxs_ks
> > channel=4
> >
> > After I run ztcfg -vv I get this:
> > Channel 01: FXS Kewlstart (Default) (Slaves: 01)
> > Channel 02: FXS Kewlstart (Default) (Slaves: 02)
> > Channel 03: FXS Kewlstart (Default) (Slaves: 03)
> > Channel 04: FXO Kewlstart (Default) (Slaves: 04)
> >
> > 4 channels configured.
> >
> > Changing signalling on channel 4 from Unused to FXO Kewlstart
> > ZT_CHANCONFIG failed on channel 4: Invalid argument (22)
> >
> > Strange this is that if I change the signalling on the first three
> > channels (or the 4th for that matter), the same message appears, so
> > I'm wondering if it's picking up the changes in the configuration...
> > or is there something I'm not getting?
> >
> > Kind regards,
> > Ivan V.
> >
>