[asterisk-users] monoBRI + install-misdn-mqueue: no inbound calls
but strange messages
Marco Mouta
marco.mouta at gmail.com
Wed Sep 6 03:44:31 MST 2006
Also your problem could be related with the Answer() you weren't answering
the calls on your previous extensions.conf
Pls test both configs with and without answer and reply your results.
On 9/6/06, Marco Mouta <marco.mouta at gmail.com> wrote:
>
> Hi,
>
> Multiple Subscriber Number. This is a telephone number associated with an
> *ETS 300 <http://www.telos-systems.com/techtalk/gldefs.htm#ETS%20300>* BRI
> line. Providers of ETS 300 often give you three MSNs with a BRI, although
> additional MSNs can be purchased. An ISDN terminal will "ring" (provide an
> alerting signal) only when calls are made to the MSN (or MSNs) entered in
> that terminal. If a terminal has no MSNs entered it will "ring" whenever
> there is a call to any of the MSN's on that BRI.
>
> You can have specific ports of your Beronet card handling specific MSNs,
> and then route it to diferent contexts into Asterisk, like handling two
> companies in one asterisk server.
>
> Got it?
>
>
> Best regards
>
>
>
>
>
> On 9/6/06, Giorgio Incantalupo < gincantalupo at fgasoftware.com> wrote:
> >
> > Hi Marco,
> > it seems that msns=* is necessary to make Asterisk work correctly...I
> > do not why...
> > We have another PBX with a monoBRI but have not this problem, maybe is
> > the different ISDN telco or the old misdn driver does not
> > complain....the important is that now it works!!
> > I have only to fix some warning (I hope for an update of the beronet
> > manual) and it seems all right.
> >
> >
> > Thank you again for help!!
> >
> >
> >
> >
> >
> > Marco Mouta wrote:
> > > msns is as far as i know, similar to DIDs but it includes the complete
> > > Dialed number (the number your customer has dialed to call you).
> > >
> > > put msns=*
> > >
> > > also test this:
> > > [outbound_isdn]
> > > exten=> _X.,1,Answer()
> > > exten => _X.,n,Playback(vm-goodbye)
> > > exten => _X.,n,Hangup
> > >
> > > exten=> s,1,Answer()
> > > exten => s,n,Playback(vm-goodbye)
> > > exten => s,n,Hangup
> > >
> > >
> > > Enable an higher debug level for misdn messages in misdn.conf (I think
> > > is this the file).
> > >
> > > Pls post your results Asterisk CLI.
> > >
> > > On 9/6/06, * Giorgio Incantalupo* <gincantalupo at fgasoftware.com
> > > <mailto:gincantalupo at fgasoftware.com >> wrote:
> > >
> > > Hi Marco,
> > > I have not a normal extensions.conf:
> > > [outbound_isdn]
> > >
> > > include => parkedcalls
> > >
> > > exten => _X.,1,DeadAGI(exten2.py )
> > > exten => _X.,2,Hangup
> > >
> > > exten => s,1,DeadAGI(exten2.py)
> > > exten => s,2,Hangup
> > >
> > > The problem is I do not see the usual coloured output on Asterisk
> > > console (-- Executing DeadAGI("SIP/8-1d1a", " exten2.py") in new
> > stack)
> > > even with verbose 100. It seems like extensions.conf is not
> > > considered.
> > >
> > >
> > > I looked for msns parameter on internet but it is not very clear
> > > what it
> > > means...is it for inbound or outbound calls?
> > >
> > >
> > > Thank You
> > >
> > >
> > > Giorgio Incantalupo
> > >
> > >
> > >
> > > Marco Mouta wrote:
> > > > please post also your extensions.conf !
> > > > ;
> > > > ; inbound group
> > > > ;
> > > > [inbound]
> > > > ; Giorgio test:
> > > > pmp_l1_check=no
> > > > >;msns=*
> > > >
> > > > This Line must be uncomment for sure, of course you may match
> > only
> > > > specific msns, but for now keep it msns=*
> > > >
> > > > msns=*
> > > >
> > > > ; end test
> > > > ports = 1
> > > > context = outbound_isdn
> > > >
> > > >
> > > > On 9/6/06, *Giorgio Incantalupo* < gincantalupo at fgasoftware.com
> > > <mailto:gincantalupo at fgasoftware.com>
> > > > <mailto:gincantalupo at fgasoftware.com
> > > <mailto:gincantalupo at fgasoftware.com>>> wrote:
> > > >
> > > > Hi Marco,
> > > > in attachment you can find my misdn.conf . Consider that I'm
> > > still
> > > > fixing
> > > > some warning because I recently upgraded from install-misdn
> > to
> > > > install-misdn-mqueue but the driver installation manual has
> > not
> > > > changed.
> > > > Some comments are due to the fact I'm still making tests to
> > > solve the
> > > > incoming calls problem I mentioned.
> > > >
> > > >
> > > > Thank you.
> > > >
> > > >
> > > > Giorgio Incantalupo
> > > >
> > > >
> > > >
> > > >
> > > > Marco Mouta wrote:
> > > > > Please post your *misdn*-*init*.*conf as well as
> > > misdn.conf so i can
> > > > > try to help u*
> > > > >
> > > > > On 9/5/06, *Giorgio Incantalupo*
> > > < gincantalupo at fgasoftware.com <mailto:
> > gincantalupo at fgasoftware.com>
> > > > <mailto: gincantalupo at fgasoftware.com
> > > <mailto:gincantalupo at fgasoftware.com>>
> > > > > <mailto:gincantalupo at fgasoftware.com
> > > <mailto:gincantalupo at fgasoftware.com>
> > > > <mailto: gincantalupo at fgasoftware.com
> > > <mailto:gincantalupo at fgasoftware.com>>>> wrote:
> > > > >
> > > > > Hi,
> > > > > I hava an Asterisk box with a monoBRI +
> > > install-misdn-mqueue
> > > > > 0.3.1-rc23
> > > > > package installed.
> > > > > I can make outbound calls but cannot receive any. I
> > get no
> > > > Asterisk
> > > > > messages on the console except for these:
> > > > >
> > > > > P[ 1] GOT IGNORE SETUP
> > > > > P[ 1] CC_RELEASE_COMPLETE|CONFIRM [TE]
> > > > > P[ 1] release_chan: Ch not found!
> > > > >
> > > > > Is there anybody who can help me, please?
> > > > >
> > > > >
> > > > > TIA
> > > > >
> > > > >
> > > > > Giorgio Incantalupo
> > > > > _______________________________________________
> > > > > --Bandwidth and Colocation provided by Easynews.com
> > > <http://Easynews.com>
> > > > <http://Easynews.com>
> > > > > < http://Easynews.com> --
> > > > >
> > > > > asterisk-users mailing list
> > > > > To UNSUBSCRIBE or update options visit:
> > > > >
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > < http://lists.digium.com/mailman/listinfo/asterisk-users>
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > > Com os melhores cumprimentos,
> > > > >
> > > > > Marco Mouta
> > > > >
> > > >
> > >
> > ------------------------------------------------------------------------
> > >
> > > >
> > > > >
> > > > > _______________________________________________
> > > > > --Bandwidth and Colocation provided by Easynews.com
> > > < http://Easynews.com>
> > > > < http://Easynews.com> --
> > > > >
> > > > > asterisk-users mailing list
> > > > > To UNSUBSCRIBE or update options visit:
> > > > >
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > > >
> > > >
> > > >
> > > >
> > > > [general]
> > > > debug = 5
> > > > tracefile = /var/log/asterisk/misdn.trace
> > > > trace_calls = false
> > > > trace_dir = /var/log/asterisk/misdn
> > > > bridging = yes
> > > > stop_tone_after_first_digit = yes
> > > > append_digits2exten = yes
> > > > l1_info_ok = yes
> > > > clear_l3 = no
> > > > method = standard
> > > >
> > > > ;;; CRYPTION STUFF
> > > >
> > > > dynamic_crypt = no
> > > > crypt_prefix = **
> > > > crypt_keys = test,muh
> > > >
> > > > ; users sections:
> > > >
> > > > [default]
> > > > context = misdn
> > > > language = it
> > > > nationalprefix = 0
> > > > internationalprefix = 00
> > > > rxgain = 0
> > > > txgain = 0
> > > > te_choose_channel = no
> > > > dialplan = 0
> > > > use_callingpres = yes
> > > > echocancelwhenbridged = no
> > > > echotraining = yes
> > > >
> > > > ;
> > > > ; inbound group
> > > > ;
> > > > [inbound]
> > > > ; Giorgio test:
> > > > pmp_l1_check=no
> > > > ;msns=*
> > > > ; end test
> > > > ports = 1
> > > > context = outbound_isdn
> > > >
> > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > --Bandwidth and Colocation provided by Easynews.com
> > > <http://Easynews.com>
> > > > <http://Easynews.com> --
> > > >
> > > > asterisk-users mailing list
> > > > To UNSUBSCRIBE or update options visit:
> > > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > --
> > > > Com os melhores cumprimentos,
> > > >
> > > > Marco Mouta
> > > >
> > >
> > ------------------------------------------------------------------------
> > > >
> > > > _______________________________________________
> > > > --Bandwidth and Colocation provided by Easynews.com
> > > < http://Easynews.com> --
> > > >
> > > > asterisk-users mailing list
> > > > To UNSUBSCRIBE or update options visit:
> > > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > <http://lists.digium.com/mailman/listinfo/asterisk-users>
> > > >
> > >
> > > _______________________________________________
> > > --Bandwidth and Colocation provided by Easynews.com
> > > <http://Easynews.com > --
> > >
> > > asterisk-users mailing list
> > > To UNSUBSCRIBE or update options visit:
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> > >
> > >
> > >
> > > --
> > > Com os melhores cumprimentos,
> > >
> > > Marco Mouta
> > >
> > ------------------------------------------------------------------------
> > >
> > > _______________________________________________
> > > --Bandwidth and Colocation provided by Easynews.com --
> > >
> > > asterisk-users mailing list
> > > To UNSUBSCRIBE or update options visit:
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> >
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
>
>
> --
>
> Com os melhores cumprimentos,
>
> Marco Mouta
>
--
Com os melhores cumprimentos,
Marco Mouta
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060906/f6e31810/attachment-0001.htm
More information about the asterisk-users
mailing list