[asterisk-users] Blind transfer 3/4 digits

[Nick Ellson]

I have just noticed that my X-Lite soft phones don't dial 3-4 digit 
extensions without first dialing it in the display and then hitting send. 
So tthat is an issue with the phone you think? Ok, I'll start there for 
the inter digit timeout, see if there is a certain dial string lenth 
before it will transmit.

Nick


-- 
Nick Ellson
CCDA, CCNP, CCSP, CCAI,
MCSE 2000, Security+, Network+
Network Hobbyist, VFR Private Pilot.


On Sat, 2 Sep 2006, Kevin Smith wrote:

> Dialing a number and transferring a number are two different things. And no 
> offense, you are not really providing a lot of details along with your 
> problem. So you can dial the numbers but not transfer from one to the other.
>
> What does the CLI say when you try the transfer? That would provide a lot of 
> information that could clue you in to what is going on.
>
> What type of phones are you using? Some phones have the ability to pattern 
> match and wait for a certain number of seconds before sending the number to 
> asterisk. For example. On our Polycom phones a user has 3 seconds (between 
> digits) to enter in 10 digits. This could be where most of your problem is.
>
> My guess the problem lies with the Phones, not Asterisk form the information 
> you provided.
>
> Kevin
>
>
> Ronald Wiplinger wrote:
>>  David Gagnon wrote:
>> >  Ronald,
>> > 
>> >      You seem to be a little bit angry about VoIP. If so, I could give
>> >  you my old Nortel system. Does this would make you happy?
>> > 
>> >  David
>> > 
>> > 
>>
>>  David,
>>
>>  I am not angry about VoIP, but please send my your old Nortel system !!!!!
>>
>>  I just do not understand why I can DIAL 601 and 6014, but not use blind
>>  transfer. Is the question too difficult?
>>
>>  I am sure there is somewhere a switch to say, wait two seconds (as for
>>  dialing) before you assume it is a complete number.
>>  It is also strange that snom phone can do it correct, because it uses the
>>  ok key.
>> 
>> 
>> >  -----Message d'origine-----
>> >  De : asterisk-users-bounces at lists.digium.com
>> >  [mailto:asterisk-users-bounces at lists.digium.com] De la part de Ronald
>> >  Wiplinger
>> >  Envoyé : 2 septembre 2006 04:20
>> >  À : Asterisk Users Mailing List - Non-Commercial Discussion
>> >  Objet : Re: [asterisk-users] Blind transfer 3/4 digits
>> > 
>> >  Anthony Rodgers wrote:
>> > 
>> > >  With respect, the problem is with your numbering plan......
>> > > 
>> > > 
>> > 
>> > 
>>
>>  This answer is therefore totally nonsense !!! (With all respect!!!)
>> 
>>
>>  Both answers have actually not lead to any step further, but to more
>>  messages. I use to refer to such answers as NON-ANSWERS.
>>  Please only reply if and really only if you know a solution for the
>>  problem! Thanks for your understanding.
>>
>>  bye
>>
>>  Ronald - again, I am not angry at all.
>> >  WHERE do you see a problem in the numbering plan?????
>> >  I see the problem in ASTERISK, because it does not wait for the last 
>> >  digit!!!
>> >  Where can I set that it waits for it?
>> > 
>> >  The beauty on voip IS that you can have different length and 
>> >  overlapping, ....
>> > 
>> >  bye
>> > 
>> >  Ronald
>> > 
>> > >  CP
>> > > 
>> > >  On 1-Sep-06, at 10:37 PM, Ronald Wiplinger wrote:
>> > > 
>> > > 
>> > > >  I found a problem in blind transfer:
>> > > > 
>> > > >  I have an extension number 601 and I have an extension 6014 !!!!
>> > > > 
>> > > >  If I get a call on 615 (snom) and transfer to 6014 it works, since 
>> > > >  snom
>> > > >  requires me to hit "ok"
>> > > > 
>> > > >  If I get a call on 601 and transfer to 6014, than 601 will get the 
>> > > >  busy
>> > > >  signal and I hang up as usually with transfer.
>> > > >  Howerver the caller get the announcements: I could not get that, 
>> > > >  ....
>> > > > 
>> > > >  What could be the problem ?
>> > > > 
>> > > >  bye
>> > > > 
>> > > >  Ronald
>> > > > 
>> > > > 
>>>>> _______________________________________________
>> > > >  --Bandwidth and Colocation provided by Easynews.com --
>> > > > 
>> > > >  asterisk-users mailing list
>> > > >  To UNSUBSCRIBE or update options visit:
>> > > >     http://lists.digium.com/mailman/listinfo/asterisk-users
>> > > > 
>> > > > 
>>>> _______________________________________________
>> > >  --Bandwidth and Colocation provided by Easynews.com --
>> > > 
>> > >  asterisk-users mailing list
>> > >  To UNSUBSCRIBE or update options visit:
>> > >    http://lists.digium.com/mailman/listinfo/asterisk-users
>> > > 
>> > > 
>> > > 
>> > >  ---
>> > >  avast! Antivirus: Inbound message clean.
>> > >  Virus Database (VPS): 0635-4, 2006/09/01
>> > >  Tested on: 2006/9/2 ¤U¤È 03:52:00
>> > >  avast! - copyright (c) 1988-2006 ALWIL Software.
>> > >  http://www.avast.com
>> > > 
>> > > 
>> > > 
>> > > 
>> > > 
>> > 
>> > 
>> > 
>> 
>> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>