[asterisk-users] Sipura SPA3000

[Bob Chiodini]

Probably the PSTN Call Ring Thru Line 1 feature.  Section 4.11 in:

http://www.sipura.com/Documents/SipuraSPAUserGuidev2.0.9.pdf#search=%22spa3000%20manual%22

By default, if my asterisk went down after the SPA3000 was already
registered, the in-bound PSTN call was lost.  I probably did not wait
long enough and I did not have "PSTN Call Ring Thru Line 1" enabled.

Bob...

On Fri, 2006-09-01 at 10:32 -0400, Kevin Collins wrote:
> My 3000 does this natively without config. 
> 
> 
> Kevin Collins
>  
> 
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Steve Kennedy
> Sent: Friday, September 01, 2006 10:03 AM
> To: asterisk-users at lists.digium.com
> Subject: Re: [asterisk-users] Sipura SPA3000
> 
> On Fri, Sep 01, 2006 at 08:11:50AM -0500, Rich Adamson wrote:
> 
> > >   I have a question on configuration of SPA3000 with asterisk.
> > >   1. I want all incoming calls are redirected from SPA3000 to my
> > >      asterisk server.
> > >   2. Asterisk then should direct this call to my SIP phones (including
> > >      Sipura)
> > >   3. In case asterisk server is down I want that call be directed
> > >      straight to the handset connected to the Sipura Is this 
> > >configuration possible?
> > The spa3000 does not have logic in it to support #3.
> 
> I thought the SPA3K could do this, i.e. on power failure or non-ability to
> connect to server, connect FXS to FXO.
> 
> 
> Steve
> 
> --