No subject

So, it has found the card OK,  but I am  little confused as to what I need 
to put in zapata.conf to make these 3 ports work with the analog phones I 
have plugged into these ports.

I have tried looking at the docs on the digium site, but cannot seem to get 
it worked out.

I tried putting the following in zapata.conf
channel => 1
signalling => fxo_ks

And this in extensions.conf
exten => 200,1,Dial(Zap/1)


When I start asterisk, I get the following:
[chan_zap.so] => (Zapata Telephony)
WARNING[16384]: File chan_zap.c, Line 6654 (load_module): Ignoring 
switchtype
WARNING[16384]: File chan_zap.c, Line 6654 (load_module): Ignoring rxwink
WARNING[16384]: File chan_zap.c, Line 576 (zt_open): Unable to specify 
channel 1: No such device or address
ERROR[16384]: File chan_zap.c, Line 4746 (mkintf): Unable to open channel 
1: No such device or address
here = 0, tmp->channel = 0, channel = 1
ERROR[16384]: File chan_zap.c, Line 6404 (load_module): Unable to register 
channel '1'
WARNING[16384]: File loader.c, Line 299 (ast_load_resource): chan_zap.so: 
load_module failed, returning -1
WARNING[16384]: File loader.c, Line 394 (load_modules): Loading module 
chan_zap.so failed!


Thanks for your help
Jay