No subject

Email Dated: Fri, 4 Apr 2003 17:51:29 -0600

Normal RJ48 jack (some call it an RJ45 which is the same physically)
out of equipment on pins 1 & 2 (Tip & Ring)
into equipment on pins 4 & 5. (Tip & Ring)

Normally tip is the lower number so I would *guess* that you need.

pin 1 --> pin 22
pin 2 --> pin 47
pin 4 <-- pin 23
pin 5 <-- pin 48

Don Pobanz

At 23:39 30/06/2003 +0200, you wrote:
>What is the pin layout of the E1 sockets on the E400Ps? What pins are for
>the TX and RX pair?
>
>Regards
>Fredrik
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>
>