[asterisk-users] Cisco 7960 Skinny calling SIP phone

[Will Roy]

I am running 1.4.0-beta2

Date: Tue, 31 Oct 2006 10:57:06 -0600 (CST)
From: Anthony LaMantia <alamantia at digium.com>
Subject: Re: [asterisk-users] Cisco 7960 Skinny calling SIP phone
To: Asterisk Users Mailing List - Non-Commercial Discussion
       <asterisk-users at lists.digium.com>
Message-ID:
       <18975956.15221162313826243.JavaMail.root at jupiler.digium.com>
Content-Type: text/plain; charset=utf-8

Which asterisk release are you running chan_skinny under?

----- Original Message -----
From: Will Roy <willroyvi at gmail.com>
To: asterisk-users at lists.digium.com
Sent: Monday, October 30, 2006 7:52:01 PM GMT-0600 US/Central
Subject: [asterisk-users] Cisco 7960 Skinny calling SIP phone


Before I got down the path of converting a Cisco 7960 I have over to SIP I
wanted to try and set it up using Skinny.

The phone registers ok with Asterisk. When I call a SIP softphone extension
on my network the call is made and I can answering it. However no voice is
heard over the call.

When I debug Skinny on the console after the call has connected I see the
following messag:

Recieved Alarm Message: DSP Keepalive Timeout [0x3, 0x10, 0x0, 0x7]

What additional information would be required to troubleshoot this? or
should I stop wasting time and just convert the phone to SIP? :)

regards
Wil
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061031/83036d19/attachment.htm