[asterisk-users] Cisco 7960 Skinny calling SIP phone

[Anthony LaMantia]

Which asterisk release are you running chan_skinny under?

----- Original Message -----
From: Will Roy <willroyvi at gmail.com>
To: asterisk-users at lists.digium.com
Sent: Monday, October 30, 2006 7:52:01 PM GMT-0600 US/Central
Subject: [asterisk-users] Cisco 7960 Skinny calling SIP phone


Before I got down the path of converting a Cisco 7960 I have over to SIP I wanted to try and set it up using Skinny. 

The phone registers ok with Asterisk. When I call a SIP softphone extension on my network the call is made and I can answering it. However no voice is heard over the call. 

When I debug Skinny on the console after the call has connected I see the following messag: 

Recieved Alarm Message: DSP Keepalive Timeout [0x3, 0x10, 0x0, 0x7] 

What additional information would be required to troubleshoot this? or should I stop wasting time and just convert the phone to SIP? :) 

regards 
Wil