[asterisk-users] Callmanager 3.3(5) and Asterisk with ooh323

[Ward, Bill]

I rebooted my CCM server and now the routing is working fine.  After a TON of reading i think i figured out how to get the tracelogs from CCM.  Here is where the error appears to occur:

10/25/2006 17:30:21.899 CCM|MediaResourceCdpc::waiting_MrmAllocateMtpResourceReq|<CLID::CM01-Cluster><NID::cm01><CT::1,100,111,3.2><IP::192.168.10.80><DEV::Port 10001>
10/25/2006 17:30:21.899 CCM|MediaResourceCdpc::findDeviceGivenList|<CLID::CM01-Cluster><NID::cm01><CT::1,100,111,3.2><IP::192.168.10.80><DEV::Port 10001>
10/25/2006 17:30:21.899 CCM|MediaResourceCdpc::mtpErrorResponseToManager|<CLID::CM01-Cluster><NID::cm01><CT::1,100,111,3.2><IP::192.168.10.80><DEV::Port 10001>
10/25/2006 17:30:21.899 CCM|MediaResourceCdpc::waiting_MrmAllocateMtpResourceReq|<CLID::CM01-Cluster><NID::cm01><CT::1,100,111,3.2><IP::192.168.10.80><DEV::Port 10001>
10/25/2006 17:30:21.899 CCM|MediaResourceCdpc::findDeviceGivenList|<CLID::CM01-Cluster><NID::cm01><CT::1,100,111,3.2><IP::192.168.10.80><DEV::Port 10001>
10/25/2006 17:30:21.899 CCM|MediaResourceCdpc::mtpErrorResponseToManager|<CLID::CM01-Cluster><NID::cm01><CT::1,100,111,3.2><IP::192.168.10.80><DEV::Port 10001>
10/25/2006 17:30:21.899 CCM|MediaResourceManager::waiting_MrmAllocateMtpResourceErr|<CLID::CM01-Cluster><NID::cm01><CT::1,100,111,3.2><IP::192.168.10.80><DEV::Port 10001>
10/25/2006 17:30:21.899 CCM|MtpNoMoreResourcesAvailable - No more MTP resources available. App ID:Cisco CallManager Cluster ID:CM01-Cluster Node ID:cm01|<CLID::CM01-Cluster><NID::cm01><CT::Alarm>
10/25/2006 17:30:21.899 CCM|MRM::waiting_AllocateMtpResourceErr - ERROR - no resources are available -- ci = 16777229|<CLID::CM01-Cluster><NID::cm01><CT::1,100,111,3.2><IP::192.168.10.80><DEV::Port 10001>

I'm looking this up now.


-----Original Message-----
From: asterisk-users-bounces at lists.digium.com on behalf of Dan Austin
Sent: Wed 10/25/2006 3:44 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [asterisk-users] Callmanager 3.3(5) and Asterisk with ooh323
 
PJ Wrote:
> Dan, can you supply your ooh323.conf for me? I would like resolve my 
> issue with not recognizing dtmf by ooh323 from callmanager
> my ooh323 is quite simple, also on callmanager config page for gateway

> to asterisk is nothing special, no faststart, no mtp; ccm v4.1.3sr3a

There's nothing secret about it, but I think I can skip that if the
settings below are what you are using-

> [general]
> disallow=all
> allow=alaw
> ;faststart=no
> ;h245tunneling=no

> [ccm]
> type=peer
> ip=192.168.40.7
> port=1720
> ;dtmfmode=rfc2833
> ;dtmfmode=h245signal
> ;h245tunneling=no
> ;faststart=no

I tend to use type=friend since I want calls in both directions.
>From the list above, you have not set the dtmfmode in [general],
which is where I set it, or in the peer.  The sample ooh323.conf
shows that the default is RFC2833, which does not work with CCM.
Either uncomment ;dtmfmode=h245signal in the peer, or uncomment it
and move it to [general].



> Dan Austin wrote:
>>
>> On the DTMF issues with chan_ooh323, I've used the channel with
>> CCM 4.0, 4.1 and 5.0 with no issues.  At one point I tested all
>> of the DTMF methods ooH323 provides.  CCM definately works with
>> h245signal, and in the past has worked with q931keypad and 
>> h245alphanumeric.  Cisco's support of RFC2833 in CCM has not
>> been impressive.  It works OK as of CCM 5.0 with SIP, but still
>> not so solid with H323.


Dan
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/ms-tnef
Size: 4473 bytes
Desc: not available
Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20061025/313a27ee/attachment.bin