[asterisk-users] Re: Asterisk + Huawei

[Carlos Medina]

Hi, that was the asterisk debug and the Huawei returns the same errors. The Huawei debug doesnt say too much, just the answer with the same errors. As you can see there the INVITE - ACK negotiation between asterisk and Huawei is there until the call is established. The errors must be in the asterisk side somewhere. Additionally this is my sip.conf.

[general]
bindport=5060           ; UDP Port to bind to (SIP standard port is 5060)
bindaddr = 0.0.0.0      ; Address to bind to
rtptimeout=120
disallow=all
allow=ulaw
allow=alaw
maxexpirey=500
defaultexpirey=500
rtptimeout=120
;insecure=very
canreinvite=no
context=default                 ; Default context for incoming calls
language=en                     ; Default language setting for all users/peers
dtmfmode=rfc2833
;relaxdtmf=yes                  ; Relax dtmf handling
nat=no                  ; Global NAT settings  (Affects all peers and users)

register=>4875129:cvcol at 10.220.0.2/1234

[epmbogota]
type=user
context=default
;username=4875129
;secret=cvcol
deny=0.0.0.0/0.0.0.0
permit=10.220.0.2/255.255.255.255
host=10.220.0.2
nat=no

[epmbogota]
type=peer
;register=yes
username=4875129
secret=cvcol
insecure=invite
host=10.220.0.2
;fromdomain=huawei.com
fromuser=4875129
context=default
;nat=yes
;trustrpid=yes

[1234]
type=friend
username=1234
;secret=1234
;insecure=invite
host=dynamic
context=outgoing
callerid=4875129
;callerid=6055001
qualify=no
dtmfmode=rfc2833
mailbox=4875129
nat=no

Im using G711 codec on both sides.
Thanks a lot for your help.

Ma Zhiyong <mazhiyong at sohu.com> wrote: need  debug * and Huawei, not * and client

 		
---------------------------------
Yahoo! Messenger with Voice. Make PC-to-Phone Calls to the US (and 30+ countries) for 2¢/min or less.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061023/7cb2c0fd/attachment.htm