[asterisk-users] Digium Single Span Card Installation

[K Y Iyer]

Hello Again

I ran the genzaptelconf - but I cannot see any channels in asterisk CLI.

I did make and install zaptel after I put in the card.  What am I
missing?

Thanks very much, indeed, for all your assistance

Best wishes

Iyer


[03 ~]# asterisk -r

Asterisk 1.2.12.1, Copyright (C) 1999 - 2006 Digium, Inc. and others.
Created by Mark Spencer <markster at digium.com>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'show warranty' for
details.
This is free software, with components licensed under the GNU General
Public
License version 2 and other licenses; you are welcome to redistribute it
under
certain conditions. Type 'show license' for details.
========================================================================
=
Connected to Asterisk 1.2.12.1 currently running on mysql-03 (pid =
23271)

03*CLI> zap show channels
   Chan Extension  Context         Language   MusicOnHold
 pseudo            default

03*CLI> zap show status
Description                              Alarms     IRQ        bpviol
CRC4
Digium Wildcard TE110P T1/E1 Card 0      OK         0          0
0
03*CLI> 

[03 ~]# ztcfg -vvv

Zaptel Configuration
======================

SPAN 1: ESF/B8ZS Build-out: 133-266 feet (DSX-1)

Channel map:

Channel 01: Clear channel (Default) (Slaves: 01)
Channel 02: Clear channel (Default) (Slaves: 02)
Channel 03: Clear channel (Default) (Slaves: 03)
Channel 04: Clear channel (Default) (Slaves: 04)
Channel 05: Clear channel (Default) (Slaves: 05)
Channel 06: Clear channel (Default) (Slaves: 06)
Channel 07: Clear channel (Default) (Slaves: 07)
Channel 08: Clear channel (Default) (Slaves: 08)
Channel 09: Clear channel (Default) (Slaves: 09)
Channel 10: Clear channel (Default) (Slaves: 10)
Channel 11: Clear channel (Default) (Slaves: 11)
Channel 12: Clear channel (Default) (Slaves: 12)
Channel 13: Clear channel (Default) (Slaves: 13)
Channel 14: Clear channel (Default) (Slaves: 14)
Channel 15: Clear channel (Default) (Slaves: 15)
Channel 16: D-channel (Default) (Slaves: 16)
Channel 17: Clear channel (Default) (Slaves: 17)
Channel 18: Clear channel (Default) (Slaves: 18)
Channel 19: Clear channel (Default) (Slaves: 19)
Channel 20: Clear channel (Default) (Slaves: 20)
Channel 21: Clear channel (Default) (Slaves: 21)
Channel 22: Clear channel (Default) (Slaves: 22)
Channel 23: Clear channel (Default) (Slaves: 23)
Channel 24: Clear channel (Default) (Slaves: 24)
Channel 25: Clear channel (Default) (Slaves: 25)
Channel 26: Clear channel (Default) (Slaves: 26)
Channel 27: Clear channel (Default) (Slaves: 27)
Channel 28: Clear channel (Default) (Slaves: 28)
Channel 29: Clear channel (Default) (Slaves: 29)
Channel 30: Clear channel (Default) (Slaves: 30)
Channel 31: Clear channel (Default) (Slaves: 31)

31 channels configured.

















-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Tzafrir
Cohen
Sent: Wednesday, October 18, 2006 5:10 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Digium Single Span Card Installation

On Wed, Oct 18, 2006 at 04:28:16PM +0530, K Y Iyer wrote:
> Hi
> 
> Also tried the following command and got the following lines.  Why is 
> that /proc/zaptel/1 reports all the 31 lines whereas ztcfg reports 18 
> channels?  What do they mean?

ztcfg reports the channels you are about to try to configure and the
result of that configuration. It does not scan your system for channels.
Your /etc/zaptel.conf does not include all the bchan-nnels, and thus not
all of them are reported and not all were configured.

<selfpromo>
If you want to scan your system for channels and attempt to create a
wonrking configuration (one that at least be able to pass ztcfg and run
asterisk with), use xpp/utils/genzaptelconf.
</selfpromo>

-- 
Tzafrir Cohen         sip:tzafrir at local.xorcom.com
icq#16849755          iax:tzafrir at local.xorcom.com
+972-50-7952406          jabber:tzafrir at jabber.org
tzafrir.cohen at xorcom.com     http://www.xorcom.com
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users