[asterisk-users] Digium Single Span Card Installation

[K Y Iyer]

Hi

Also tried the following command and got the following lines.  Why is
that /proc/zaptel/1 reports all the 31 lines whereas ztcfg reports 18
channels?  What do they mean?

Thanks

Best wishes

Iyer



# cat /proc/zaptel/1
Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0" HDB3/CCS/CRC4

           1 WCT1/0/1 Clear
           2 WCT1/0/2 Clear
           3 WCT1/0/3 Clear
           4 WCT1/0/4 Clear
           5 WCT1/0/5 Clear
           6 WCT1/0/6 Clear
           7 WCT1/0/7 Clear
           8 WCT1/0/8 Clear
           9 WCT1/0/9 Clear
          10 WCT1/0/10 Clear
          11 WCT1/0/11 Clear
          12 WCT1/0/12 Clear
          13 WCT1/0/13 Clear
          14 WCT1/0/14 Clear
          15 WCT1/0/15 Clear
          16 WCT1/0/16 HDLCFCS
          17 WCT1/0/17 Clear
          18 WCT1/0/18
          19 WCT1/0/19
          20 WCT1/0/20
          21 WCT1/0/21
          22 WCT1/0/22
          23 WCT1/0/23
          24 WCT1/0/24
          25 WCT1/0/25
          26 WCT1/0/26
          27 WCT1/0/27
          28 WCT1/0/28
          29 WCT1/0/29
          30 WCT1/0/30
          31 WCT1/0/31 Clear 

-----Original Message-----
From: K Y Iyer 
Sent: Wednesday, October 18, 2006 4:22 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: Digium Single Span Card Installation

Hi

I put in a single span Digium card into my Asterisk box and followed
some guidelines I found.

The ztcfg -vv command gives the following output.  Is this correct and
does this mean that Asterisk has recognised my E1 card and I will be
able to connect my E1 line and use the 30 channels to communicate
outside the Asterisk box?

Thanks a million

Best wishes

Iyer


Zaptel Configuration
======================

SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)

Channel map:

Channel 01: Clear channel (Default) (Slaves: 01) 
Channel 02: Clear channel (Default) (Slaves: 02) 
Channel 03: Clear channel (Default) (Slaves: 03) 
Channel 04: Clear channel (Default) (Slaves: 04) 
Channel 05: Clear channel (Default) (Slaves: 05) 
Channel 06: Clear channel (Default) (Slaves: 06) 
Channel 07: Clear channel (Default) (Slaves: 07) 
Channel 08: Clear channel (Default) (Slaves: 08) 
Channel 09: Clear channel (Default) (Slaves: 09) 
Channel 10: Clear channel (Default) (Slaves: 10) 
Channel 11: Clear channel (Default) (Slaves: 11) 
Channel 12: Clear channel (Default) (Slaves: 12) 
Channel 13: Clear channel (Default) (Slaves: 13) 
Channel 14: Clear channel (Default) (Slaves: 14) 
Channel 15: Clear channel (Default) (Slaves: 15) 
Channel 16: D-channel (Default) (Slaves: 16) 
Channel 17: Clear channel (Default) (Slaves: 17) 
Channel 31: Clear channel (Default) (Slaves: 31)

18 channels configured.