[asterisk-users] tdm2400p question

[Lito Lampitoc]

I see, thank you very much for all your answers. Btw, the interface looks
different than the ordinary rj45, so how are you going to plug in the rj45
plug to it?

On 10/16/06, George Pajari <George.Pajari at netvoice.ca> wrote:
>
> The TDM2400P supports up to six quad modules -- each quad module
> supports EITHER four FXS ports OR four FXO ports...
>
> THEREFORE
>   with 6 quad FXO modules one has 24 FXO ports,
>   with 5 quad FXO modules and 1 quad FXS module one has 20 FXO ports and
> 4 FXS ports...
>
> the remainder of these examples is left as an exercise for the reader.
>
> The board does not have to be fully populated (i.e. you do not need to
> have all six quad module positions filled).
>
> g.
>
> --
> George Pajari, netVOICE communications    604 484 VOIP (484 8647 x102)
> Open Source VoIP/Telephony Specialists  1 877 NET VOIP (638 8647 x102)
>                   www.netvoice.ca  www.ip-centrex.ca
>       www.digium.ca www.grandstream.ca www.sipura.ca www.snom.ca
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061016/c7ce85cf/attachment.htm