[asterisk-users] Problem with ZAPTEL-1.4.0-beta1 and WCT100P card
Matthew Crocker
matthew at crocker.com
Wed Oct 11 16:50:38 MST 2006
I don't like following up with my own post but I figured out the
problem.
The server is running FC2, I did a 'yum -y update' and after it was
complete I rebuilt zaptel (make clean ; make ; make install) and
everything works fine now. Musta been something with the compiler ??
-Matt
On Oct 11, 2006, at 1:25 PM, Matthew Crocker wrote:
>
> Hello,
>
> I'm trying to upgrade an Asterisk 1.2 linux box to Asterisk 1.4.
> I installed the following
>
> -rw-r--r-- 1 root root 10908541 Sep 21 13:25 asterisk-1.4.0-
> beta2.tar.gz
> -rw-r--r-- 1 root root 993921 Sep 21 13:25 asterisk-addons-1.4.0-
> beta1.tar.gz
> -rw-r--r-- 1 root root 80019 Sep 21 13:25 libpri-1.4.0-
> beta1.tar.gz
> -rw-r--r-- 1 root root 1523413 Sep 21 13:25 zaptel-1.4.0-
> beta1.tar.gz
>
> I get an error when I run ztcfg. (see below). Any ideas? Is the
> ztcfg issue with unable to read version info a problem?
>
>
> [root at asterisk-1 src]# ztcfg -d 99 -v
> Line 11: span=1,1,1,esf,b8zs
> Line 12: bchan=1-23
> Line 13: dchan=24
> Line 17: loadzone = us
> Line 18: defaultzone = us
> <End of File>
> Notice: Configuration file is /etc/zaptel.conf
> line 18: Unable to read Zaptel version information.
>
> Zaptel Version: môy
> Echo Canceller:
> Configuration
> ======================
>
> SPAN 1: ESF/B8ZS Build-out: 133-266 feet (DSX-1)
>
> 24 channels configured.
>
> ZT_CHANCONFIG failed on channel 1: Inappropriate ioctl for device (25)
>
>
> [root at asterisk-1 src]# strace ztcfg
> execve("/sbin/ztcfg", ["ztcfg"], [/* 25 vars */]) = 0
> uname({sys="Linux", node="asterisk-1", ...}) = 0
> brk(0) = 0x8437000
> open("/etc/ld.so.preload", O_RDONLY) = -1 ENOENT (No such file
> or directory)
> open("/etc/ld.so.cache", O_RDONLY) = 3
> fstat64(3, {st_mode=S_IFREG|0644, st_size=38549, ...}) = 0
> old_mmap(NULL, 38549, PROT_READ, MAP_PRIVATE, 3, 0) = 0xf6ff6000
> close(3) = 0
> open("/lib/tls/libm.so.6", O_RDONLY) = 3
> read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\0\203
> \206"..., 512) = 5
> 12
> fstat64(3, {st_mode=S_IFREG|0755, st_size=214796, ...}) = 0
> old_mmap(0x865000, 139424, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0)
> = 0x865000
> old_mmap(0x886000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|
> MAP_FIXED, 3, 0x20000
> ) = 0x886000
> close(3) = 0
> open("/lib/tls/libc.so.6", O_RDONLY) = 3
> read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\300ku
> \000"..., 512) = 5
> 12
> fstat64(3, {st_mode=S_IFREG|0755, st_size=1455084, ...}) = 0
> old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|
> MAP_ANONYMOUS, -1, 0) = 0
> xf6ff5000
> old_mmap(0x742000, 1158124, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0)
> = 0x742000
> old_mmap(0x857000, 16384, PROT_READ|PROT_WRITE, MAP_PRIVATE|
> MAP_FIXED, 3, 0x1150
> 00) = 0x857000
> old_mmap(0x85b000, 7148, PROT_READ|PROT_WRITE, MAP_PRIVATE|
> MAP_FIXED|MAP_ANONYMO
> US, -1, 0) = 0x85b000
> close(3) = 0
> mprotect(0x857000, 8192, PROT_READ) = 0
> mprotect(0x886000, 4096, PROT_READ) = 0
> mprotect(0x73e000, 4096, PROT_READ) = 0
> set_thread_area({entry_number:-1 -> 6, base_addr:0xf6ff5820, limit:
> 1048575, seg_
> 32bit:1, contents:0, read_exec_only:0, limit_in_pages:1,
> seg_not_present:0, usea
> ble:1}) = 0
> munmap(0xf6ff6000, 38549) = 0
> open("/dev/zap/ctl", O_RDWR) = 3
> brk(0) = 0x8437000
> brk(0x8458000) = 0x8458000
> brk(0) = 0x8458000
> open("/etc/zaptel.conf", O_RDONLY) = 4
> fstat64(4, {st_mode=S_IFREG|0644, st_size=330, ...}) = 0
> mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS,
> -1, 0) = 0xf6
> fff000
> read(4, "# Autogenerated by ./genzaptelco"..., 4096) = 330
> read(4, "", 4096) = 0
> close(4) = 0
> munmap(0xf6fff000, 4096) = 0
> ioctl(3, 0x40244a12, 0x8078560) = 0
> ioctl(3, 0x80844a05, 0xfeec3140) = -1 EINVAL (Invalid argument)
> ioctl(3, 0x404c4a13, 0x80797ac) = -1 ENOTTY (Inappropriate
> ioctl for dev
> ice)
> write(2, "ZT_CHANCONFIG failed on channel "..., 71ZT_CHANCONFIG
> failed on channe
> l 1: Inappropriate ioctl for device (25)
> ) = 71
> close(3) = 0
> exit_group(1) = ?
>
> [root at asterisk-1 src]# cat /etc/zaptel.conf
> # Autogenerated by ./genzaptelconf -- do not hand edit
> # Zaptel Configuration File
> #
> # This file is parsed by the Zaptel Configurator, ztcfg
> #
>
> # It must be in the module loading order
>
>
> # Span 1: WCT1/0 "Digium Wildcard T100P T1/PRI Card 0"
> span=1,1,1,esf,b8zs
> bchan=1-23
> dchan=24
>
> # Global data
>
> loadzone = us
> defaultzone = us
>
> [root at asterisk-1 src]# cat /etc/asterisk/zapata.conf
> switchtype=national
> context=default
> signalling=pri_net
> group=1
> channel => 1-23
>
> --
> Matthew S. Crocker
> Vice President
> Crocker Communications, Inc.
> Internet Division
> PO BOX 710
> Greenfield, MA 01302-0710
> http://www.crocker.com
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
--
Matthew S. Crocker
Vice President
Crocker Communications, Inc.
Internet Division
PO BOX 710
Greenfield, MA 01302-0710
http://www.crocker.com
More information about the asterisk-users
mailing list