[asterisk-users] zt_chanconfig failed

[Tzafrir Cohen]

On Wed, Oct 11, 2006 at 02:52:26PM -0500, DiegoF wrote:
> 
> they span is E1, I have still not connected it, although I will connect to a
> PBX panasonic
> this is what leaves in /proc/zaptel/
> 
> Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0" HDB3/
> 
>           1 WCT1/0/1 CAS
>           2 WCT1/0/2 CAS
>           3 WCT1/0/3 CAS
>           4 WCT1/0/4 CAS
>           5 WCT1/0/5 CAS
>           6 WCT1/0/6 CAS
>           7 WCT1/0/7 CAS
>           8 WCT1/0/8 CAS
>           9 WCT1/0/9 CAS
>          10 WCT1/0/10 CAS
>          11 WCT1/0/11 CAS
>          12 WCT1/0/12 CAS
>          13 WCT1/0/13 CAS
>          14 WCT1/0/14 CAS
>          15 WCT1/0/15 CAS
>          16 WCT1/0/16 HDLCFCS
>          17 WCT1/0/17 CAS
>          18 WCT1/0/18 CAS
>          19 WCT1/0/19 CAS
>          20 WCT1/0/20 CAS
>          21 WCT1/0/21 CAS
>          22 WCT1/0/22 CAS
>          23 WCT1/0/23 CAS
>          24 WCT1/0/24 CAS

Seems that the card provides 24 channels. I believe that there's a
jumper to set on the card to make it E1, right?

> 
> otra cosa, cuando le doy el modprobe wcte11xp me da esto
> 
> another thing, when I give modprobe wcte11xp him gives this me
> 
> ZT_CHANCONFIG failed on channel 25: No such device or address (6)
> FATAL: Error running install command for wcte11xp

This is because of the strange custom to run ztcfg automatically at
modprobe time. Very confusing, and error-prone.

-- 
Tzafrir Cohen         sip:tzafrir at local.xorcom.com
icq#16849755          iax:tzafrir at local.xorcom.com
+972-50-7952406          jabber:tzafrir at jabber.org
tzafrir.cohen at xorcom.com     http://www.xorcom.com