[asterisk-users] Strange FXS disconnection problem.

[David Bath]

Hi Paul,

Thanks for reply.

It is only recently that I have added an X100P - the asterisk server has
been doing purely SIP and IAX2 (to an ISDN gateway) before and
everything is perfect.  There are no agents dropped etc.

It is purely that the zap channel (to X100P) gets released with no
errors (that I can currently see!), even with -v > 50.

Cheers,

Dave

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Paul Ianas
Sent: 11 October 2006 11:14
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [asterisk-users] Strange FXS disconnection problem.

I experienced a similar problem, but with AT-RG 623TX (ISDN BRA
gateway). I can only tell you that there is no Asterisk problem. You
should try to debug hardware / driver problems.

Question: is(are) the user-agent(s) still authenticated with Asterisk
after the call is dropped? You should also set the debug level top the
highest value.

--
Paul Ianas
Programming Engineer
Level 7 Software
Timisoara, 59D Bucovinei
phone: 0744137020
email: paul.ianas at level7.ro

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Tzafrir
Cohen
Sent: Wednesday, October 11, 2006 10:29 AM
To: asterisk-users at lists.digium.com
Subject: Re: [asterisk-users] Strange FXS disconnection problem.

On Tue, Oct 10, 2006 at 11:43:09PM +0100, David Bath wrote:
> Hi All,
> 
>  
> 
> I've tried to find the solution to this, but sadly met with failure.
> I've got an asterisk box with two X100P's in, and both cards have the
> same strange problem.  After 2min 40seconds (always: within +/- 1sec)
> they drop an outbound call.  Inbound calls are not affected... they
stay
> up as long as required.
> 

Do you use busydetect? Any chance that there's a busy tone there?

>  
> 
> I've seen a fair bit of chatter about similar kinds of problems
> sometimes being related to callprogess detecting false hang-ups, so
I've
> made sure this is disabled in Zapata.conf but it seems to have had no
> effect.
> 
>  
> 
> I was running a slightly older version of zaptel/asterisk (1.2.0) and
> I've upgraded to the lastest build, but also with no success.

Details, pleasse:

zapata.conf

logs from a call (set verbose to at least 3, and enable full in
logger.conf).

-- 
Tzafrir Cohen         sip:tzafrir at local.xorcom.com
icq#16849755          iax:tzafrir at local.xorcom.com
+972-50-7952406          jabber:tzafrir at jabber.org
tzafrir.cohen at xorcom.com     http://www.xorcom.com
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users