[asterisk-users] Echo Cancel Cards

[Forrest Beck]

I am using the TE110P with the Intel 945P chipset, and I don't have
any issues with compatibility.  The 945P chipset is a very common
chipset for the D and 4 processor.

Works quite well.

On 10/10/06, R.R. Libera <astecomm at gmail.com> wrote:
> I´m about to acquire an E1 interface. I was reading about TE110P and
> hardware incompatibilities issues with some boards, servers and
> chipsets. I also read a lot of compliments about Sangoma Hardware
> (specially for E1/T1 interfaces) and I was wondering if A101 from Sagoma
> is a better choice (technically speaking) than Digium TE110P. I read
> now, on this post, an opinion about Sangoma interfaces and echo
> cancellation issues..
>
> I have a PC with Asus P5LD2 board (Intel 945P chipset). I asked Digium
> support for how compatible is the TE110P with my box.. and they said
> that no incompatibility issues had been reported with the chipset I
> use.. BUT, they had no test TE110P with this chipset...
>
> I´m not a Sangoma or Digium fan... I´m just a newbie who don´t want to
> get the wrong piece of hardware. I really appreciate any advice from
> people with a lot of experience and skills on this topic.
>
> Thanks in advance
>
> R.R. Libera
>
> Dovid B escribió:
> > I have never used T1 cards but as far as POTS line cards I would say
> > that I like sangoma better. It is a little bit harder to set up but
> > works wonders.
> > ----- Original Message ----- From: "Thomas Kenyon"
> > <digium at sanguinarius.co.uk>
> > To: "Asterisk Users Mailing List - Non-Commercial Discussion"
> > <asterisk-users at lists.digium.com>
> > Sent: Tuesday, October 10, 2006 12:31 PM
> > Subject: Re: [asterisk-users] Echo Cancel Cards
> >
> >
> >> Joseph wrote:
> >>> On Mon, 2006-10-09 at 20:41 -0400, Forrest Beck wrote:
> >>>> Anyone using the echo cancelation cards from digium?  We are using the
> >>>> single span T1 card with out  echo cancel and I was curious if it was
> >>>> worth the money.
> >>>
> >>> I'm running Asterisk 1.0.11 with few Sipura 3000/2000 units and have no
> >>> echo whatsoever.   I just tried new Asterisk 1.2.12.1 and the first
> >>> thing I've noticed was
> >>> terrible echo, not to mentioned that it keep crashing constantly to a
> >>> point this that is not possible to use it.
> >> I've got an SPA-3000 at home that is constantly crashing, echoey and
> >> is almost unusable. (The CS4660-based ATA and PA1688-based handsets
> >> have otherwise been fine, as were the the Cisco 468 and Linysys PAP2
> >> when they were in use).
> >> _______________________________________________
> >> --Bandwidth and Colocation provided by Easynews.com --
> >>
> >> asterisk-users mailing list
> >> To UNSUBSCRIBE or update options visit:
> >>   http://lists.digium.com/mailman/listinfo/asterisk-users
> >>
> >
> >
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>