[asterisk-users] TDM22B

[Jack Morgan]

I'm having trouble getting my TDM22B to answer a call. I have an analog line  
plugged into each FXO modules (two analog lines) Neither answer or pickup the 
call in Astrerisk when dialed from an external phone (eg cell phone).

I know the card is working & modules zaptel wctdm are loaded. Here is my dmesg 
output:

[17214228.752000] Module 0: Installed -- AUTO FXO (FCC mode)
[17214228.952000] Module 1: Installed -- AUTO FXO (FCC mode)
[17214229.840000] Module 2: Installed -- AUTO FXS/DPO
[17214230.728000] Module 3: Installed -- AUTO FXS/DPO
[17214230.732000] Found a Wildcard TDM: Wildcard TDM400P REV I (4 modules)
[17214230.732000] Registered tone zone 0 (United States / North America)
[17289961.408000] Registered tone zone 0 (United States / North America)
[17291652.280000] Registered tone zone 0 (United States / North America)
[17291665.348000] Registered tone zone 0 (United States / North America)

My /etc/zaptel.conf info:
loadzone=us
defaultzone=us

# Use Kewlstart FXS signalling for the FXO modules 0 and 1 of the TDM422B card
fxsks=1-2

# Use Kewlstart FXO signalling for the FXS modules 0 and 1 of the TDM422B card
fxoks=3-4

I have two FXO modules in the 1st & 2nd slots on the TDM board and two FXS 
modules in the 3rd & 4th lots.

My /etc/asterisk/zapata.conf info:
[channels]
; defaults
;usedistinctiveringdetection=yes
usecallerid=yes
hidecallerid=no
callwaiting=yes
restrictcid=no
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echotraining=yes

; define channels for FXO modules 0 & 1
signalling=fxs_ks
group=1
channel => 1-2
context=incoming
callerid=asreceived

; define channels for FXS modules 0
signalling=fxo_ks
channel => 3
context=home
callerid=asreceived


Any help would be appreciated!

Thanks,
Jack Morgan