[asterisk-users] Clipcomm CG 410 / FXO Gateway

[Cory Andrews]

Barry - I don't know if you've taken a look at it, but ClipComm has put 
together an Asterisk Quickstart guide for the CG-410 which includes some 
config documentation, you can find it here.

http://www.clipcomm.co.kr/down/manual/CG-410/CG-410withAsterisk.zip

Cory J Andrews
++++++++++++
VOIPSupply.com
454 Sonwil Drive
Buffalo, NY 14225
++++++++++++++
voice - 800.398.VoIP X3402
email - Cory at VOIPSupply.com
AIM - B2CORY
----- Original Message ----- 
From: "Barry Fawthrop" <barry at ttienterprises.org>
To: "Asterisk Users Mailing List - Non-Commercial Discussion" 
<asterisk-users at lists.digium.com>
Sent: Wednesday, October 04, 2006 8:54 PM
Subject: [asterisk-users] Clipcomm CG 410 / FXO Gateway


> Hi all
>
> Anyone got a Clipcomm CG410 working with Asterisk ???
> Where incoming calls are passed on directly to asterisk and
> outbound calls are passed directly to PSTN ??
>
> I have tried configuring the gateway and I just can't get it to register 
> no matter what I try
> If any could share extensions.conf and sip.conf examples
> I'm not even sure do I set the gateway as an IP Phone device or as a VoIp 
> provider ??
>
> All help greatly appriecated
>
> Thanks
> Barry
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>