[asterisk-users] Problems with automon

[Clif Jones]

Thanks for the response.  Answers inline..

-----Original Message-----
>From: Michael Neuhauser <mike at firmix.at>
>Sent: Oct 3, 2006 10:37 AM
>To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users at lists.digium.com>, Clif Jones <clif_lists at earthlink.net>
>Subject: Re: [asterisk-users] Problems with automon
>
>On Tue, 2006-10-03 at 09:20 -0400, Clif Jones wrote:
>> I have been trying to get automon working on Asterisk 1.2.12.1 and I
>> am having some problems.  I have searched the list archives and have
>> not found my answer either.  This system is setup for SIP to SIP calls
>> with G.729 codecs.
>
>You do have a G.729 codec module on your machine?
Yes, I have plenty of G.729 licenses and of course, the commercial G.729 codec.
>
>>   I believe that I have the config files setup (*1 enabled in
>> features.conf, DYNAMIC_FEATURES global variable and 'wW' Dial options
>> in extensions.conf).
>
>Are you using [featuremap]/automon or [applicationmap]/<MYOWNFEATURE>?
>(in the first case you do not need DYNAMIC_FEATURES in the second case
>the wW flags do apply).
I'm using the [featuremap] with the example code for '*1 - automon' that was provided.  So, you are saying that I do NOT need the DYNAMIC_FEATURES global OR the 'wW' options for the [featuremap]?  I'm trying to think back but I believe that I had trouble getting this working without some of that but I may be wrong.
>
>>   I lose audio both ways when '*1' is pressed and if I hangup on the
>> originating side that initiated automon, I can hear a brief DTMF tone
>> on the gateway side just before the call is dropped.  I also get the
>> following log:
>> Sep 17 21:17:21 WARNING[3007] res_features.c: Bridge failed on
>> channels SIP/2009-081eb5b8 and SIP/gateway-081e58c0
>
>This could be related to a bug in 1.2.12.1 that affects DTMF handling
>for bridged calls (see http://bugs.digium.com/view.php?id=7982). Bug was
>fixed in 1.2 branch -> get 1.2 branch from SVN or wait for the 1.2.13
>release. Automon does work for me after the fix from the 1.2 branch was
>applied.
I'll look into this.  Thanks!  I'm still trying to figure out though why it works for some cases and not others.  I'm using RFC2833 DTMF in all cases.

>-- 
>Dr. Michael Neuhauser                              mailto:mike at firmix.at
>Firmix Software GmbH                                  sip:mike at firmix.at
>Vienna/Austria/Europe                               tel:+43-1-7890849-30
>Linux Development and Services                     http://www.firmix.at/
>