R: [asterisk-users] Zaphfc woth florz patch

[Henrik Woffinden]

Hi,

You haven't applied the florz patch correct. You apply it like this :
1.   Go to your bristuff directory
2.    zcat [path to florz patch
file]/zaphfc_0.3.0-PRE-1o_florz-12.diff.gz | patch -p1

When it is applied the you will get this output:
[root at delias ~]# modinfo zaphfc
filename:       /lib/modules/2.6.17-1.2187_FC5.vs2.0.2.3/misc/zaphfc.ko
description:    HFC-S PCI A Zaptel Driver
author:         Klaus-Peter Junghanns <kpj at junghanns.net>
license:        GPL
vermagic:       2.6.17-1.2187_FC5.vs2.0.2.3 mod_unload 686 REGPARM
4KSTACKS gcc-4.1
depends:       
srcversion:     4FA4AFA6BDEBDA5885D440A
parm:           jitterbuffer:int
parm:           timer_card:int
parm:           sync_slave:int
parm:           debug:int
parm:           modes:int

Note the 2 new parm....

Med venlig hilsen / Best regards,

Henrik Woffinden


Giordano Grandis wrote:
> First all i wrote syns_slave instead sync_slave, anyway also with sync_slave i got the same error.
> This is the modinfo output :
>
> modinfo zaphfc
> filename:    /lib/modules/2.4.31/misc/zaphfc.o
> description: "HFC-S PCI A Zaptel Driver"
> author:      "Klaus-Peter Junghanns <kpj at junghanns.net>"
> license:     "GPL"
> parm:        modes int
> parm:        debug int 
>
> ...i have again the kpj ?
>
> Thanks again
>
>
> Giordano
>
>
> -----Messaggio originale-----
> Da: Tzafrir Cohen [mailto:tzafrir.cohen at xorcom.com] 
> Inviato: martedì 3 ottobre 2006 15.43
> A: Giordano Grandis
> Oggetto: Re: [asterisk-users] Zaphfc woth florz patch
>
> On Tue, Oct 03, 2006 at 03:00:11PM +0200, Giordano Grandis wrote:
>   
>> Hi guys, i just installed the flortz patch with bristuff-0.2.0-RC8r but
>> when i load module zaphfc i get this warning message:
>>     
>
> modinfo zaphfc ?
>
>   
>>  
>>  
>> Warning: ignoring syns_slave=0, no such parameter in this module
>> Warning: ignoring timer_card=1, no such parameter in this module
>> Module zaphfc loaded, with warnings
>>  
>> Zaptel Configuration
>> ======================
>>  
>> SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1)
>> SPAN 2: CCS/ AMI Build-out: 399-533 feet (DSX-1)
>>  
>> Channel map:
>>  
>> Channel 01: Individual Clear channel (Default) (Slaves: 01)
>> Channel 02: Individual Clear channel (Default) (Slaves: 02)
>> Channel 03: D-channel (Default) (Slaves: 03)
>> Channel 04: Individual Clear channel (Default) (Slaves: 04)
>> Channel 05: Individual Clear channel (Default) (Slaves: 05)
>> Channel 06: D-channel (Default) (Slaves: 06)
>>  
>> 6 channels configured.
>>
>>  
>> Asterisk starts without problem.
>>  
>> Any ideas ?
>>  
>> Thanks in advance
>>  
>> Giordano
>>     
>
>   
>> _______________________________________________
>> --Bandwidth and Colocation provided by Easynews.com --
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>     
>
>
>