[asterisk-users] 200+ analog phones connected to FXS modules

[Jon Schøpzinsky]

I think It would be cheaper to use dedicated VoIP PSTN Gateways, such as audiocodes or similar (audiocodes is actually a bad example, as their not that cheap). But dedicated ATA hardware with 24 or more ports.

Jon 

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Vieri
Sent: 30. november 2006 10:15
To: asterisk-users at lists.digium.com
Subject: [asterisk-users] 200+ analog phones connected to FXS modules

I am trying to find out the best way to replace one of
our hardware PBXs. It currently has 200+ analog phones
connected to it. The idea is to take advantage of the
already installed phone cables (big building) so I'm
trying to avoid the use of ethernet adapters (if
possible). However, I'm realizing that it's an
expensive setup and will definitely require two or
more cooperating Asterisk servers (cluster) mainly due
to PCI slot availability.

I am aware of the TDM2400P card. One could put 6 FXS
uqad-modules and would serve 24 analog phones.

However, I would need at least 9 of these PCI cards
which could be placed in 2 or 3 servers.

Is there another way of doing this (hopefully cheaper
and more convenient)?

Thank you for your suggestions.

Vieri



 
____________________________________________________________________________________
Yahoo! Music Unlimited
Access over 1 million songs.
http://music.yahoo.com/unlimited
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users