[asterisk-users] 200+ analog phones connected to FXS modules

[Carlo Taguinod]

Take a look at Channel Banks

On 11/30/06, Vieri <rentorbuy at yahoo.com> wrote:
>
> I am trying to find out the best way to replace one of
> our hardware PBXs. It currently has 200+ analog phones
> connected to it. The idea is to take advantage of the
> already installed phone cables (big building) so I'm
> trying to avoid the use of ethernet adapters (if
> possible). However, I'm realizing that it's an
> expensive setup and will definitely require two or
> more cooperating Asterisk servers (cluster) mainly due
> to PCI slot availability.
>
> I am aware of the TDM2400P card. One could put 6 FXS
> uqad-modules and would serve 24 analog phones.
>
> However, I would need at least 9 of these PCI cards
> which could be placed in 2 or 3 servers.
>
> Is there another way of doing this (hopefully cheaper
> and more convenient)?
>
> Thank you for your suggestions.
>
> Vieri
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061130/4a12f62e/attachment.htm