[asterisk-users] dialing with different speed

[Androtech]

where is the "calling" button?
I do not have it. I just can call typing numbers. The manual says that I
should press "#" at the end of the number, but it does not work


----- Original Message ----- 
From: "Brett Crapser" <brett at websmyths.com>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users at lists.digium.com>
Sent: Saturday, November 25, 2006 5:13 PM
Subject: Re: [asterisk-users] dialing with different speed


> On Saturday 25 November 2006 09:38 am, Androtech wrote:
>> Hi all,
>>
>> I have a VOIP phone with the PA1688 chip; my firmware is V1.42.028.
>>
>> This IP phone is registered in an Asterisk PBX and I've a problem when I
>> dialing internal number. If I dial an internal number, like for example
>> 102, the IP phone takes 35 seconds to send the number to Asterisk
>
> Rather look to your phone settings. I have a AT-320.
>
> Or better dial your local number and hit the 'call' button which bypasses
> the
> internal dial plan of the phone and dials the number.
>
> Also - the current version for PA1688 is something like 1.55.XXX
>
> Brett
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>