[asterisk-users] Asterisk and TDM400P ?

[Giorgio Incantalupo]

Noc,
it seems your zap*.conf are ok....have you tried to do all the modules 
loading procedure step by step?

ztcfg -s
modprobe -r wctdm
modprobe wctdm
ztcfg -vv


Giorgio Incantalupo




Noc Phibee wrote:
> Thanks Giogio,
>
> but no i don't have this module
>
> bye
>
>
>
> Giorgio Incantalupo a écrit :
>> Hi Noc,
>> I had similar problem. Check If you have netjetpci module and try to 
>> delete it...this solved my problem.
>>
>>
>> Giorgio Incantalupo
>>
>>
>>
>> Noc Phibee wrote:
>>> Hi
>>>
>>> i have buy a Digium TDM400P with 1 fxo modules TDM01B for connect
>>> my asterisk to a french analog line.
>>>
>>> In my zaptel.conf, i have:
>>>    loadzone=fr
>>>    defaultzone=fr
>>>    fxols=3
>>> when i load the module, i have in logs:
>>> Nov 24 06:13:40 gw kernel: Freed a Wildcard
>>> Nov 24 06:13:40 gw kernel: Zapata Telephony Interface Unloaded
>>> Nov 24 06:13:40 gw zaptel: Removing zaptel module:  succeeded
>>> Nov 24 06:13:42 gw kernel: Zapata Telephony Interface Registered on 
>>> major 196
>>> Nov 24 06:13:42 gw kernel: Zaptel Version: 1.2.9.1-1mdv2007.0 Echo 
>>> Canceller: KB1
>>> Nov 24 06:13:42 gw zaptel: Loading zaptel framework:  succeeded
>>> Nov 24 06:13:42 gw kernel: ACPI: PCI Interrupt 0000:02:0a.0[A] -> 
>>> GSI 21 (level, low) -> IRQ 20
>>> Nov 24 06:13:43 gw kernel: Freshmaker version: 73
>>> Nov 24 06:13:43 gw kernel: Freshmaker passed register test
>>> Nov 24 06:13:43 gw kernel: Module 0: Not installed
>>> Nov 24 06:13:43 gw kernel: Module 1: Not installed
>>> Nov 24 06:13:43 gw kernel: Module 2: Not installed
>>> Nov 24 06:13:43 gw kernel: Module 3: Installed -- AUTO FXO (FCC mode)
>>> Nov 24 06:13:43 gw kernel: Found a Wildcard TDM: Wildcard TDM400P 
>>> REV I (1 modules)
>>> Nov 24 06:13:44 gw kernel: Registered tone zone 2 (France)
>>> Nov 24 06:13:44 gw zaptel: Running ztcfg:  succeeded
>>>
>>> and my problems are whit all sample that i have, asterisk don't 
>>> restart and put me:
>>> Nov 24 06:15:17 NOTICE[2943] cdr.c: CDR simple logging enabled.
>>> Nov 24 06:15:17 WARNING[2943] chan_zap.c: Unable to specify channel 
>>> 3: No such device
>>> Nov 24 06:15:17 ERROR[2943] chan_zap.c: Unable to open channel 3: No 
>>> such device
>>> here = 0, tmp->channel = 3, channel = 3
>>> Nov 24 06:15:17 ERROR[2943] chan_zap.c: Unable to register channel '3'
>>> Nov 24 06:15:17 WARNING[2943] loader.c: chan_zap.so: load_module 
>>> failed, returning -1
>>> Nov 24 06:15:17 WARNING[2943] loader.c: Loading module chan_zap.so 
>>> failed!
>>>
>>> for all channel (i have tested from 1 to 5)
>>>
>>> my zapata.conf:
>>> [trunkgroups]
>>>
>>> [channels]
>>> context=default
>>> signalling=fxo_ls
>>> usecallerid=yes
>>> hidecallerid=no
>>> callwaiting=yes
>>> usecallingpres=yes
>>> callwaitingcallerid=yes
>>> threewaycalling=yes
>>> transfer=yes
>>> canpark=yes
>>> cancallforward=yes
>>> callreturn=yes
>>> echocancel=yes
>>> echocancelwhenbridged=yes
>>> rxgain=0.0
>>> txgain=0.0
>>> group=1
>>> callgroup=1
>>> pickupgroup=1
>>> immediate=no
>>> busydetect=yes
>>> musiconhold=default
>>> channel => 3
>>>
>>>
>>>
>>> where is my errors ?
>>>
>>> Thanks for your help
>>>
>>> _______________________________________________
>>> --Bandwidth and Colocation provided by Easynews.com --
>>>
>>> asterisk-users mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>
>> _______________________________________________
>> --Bandwidth and Colocation provided by Easynews.com --
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>